Everlast PowerPro 256

From Open Source Ecology
Jump to: navigation, search

Overview

Use

Settings

Plasma Cutter Settings

  • cut mode
  • poles set at dc
  • turn all green knobs to left except for the post flow
  • pulse off
  • 2t mode
  • main amperage control - 50 or 60
  • if we have the amperage control to 60 = we'll be drawing 50 amps
  • ground clamp as close to the metal as possible
  • maintain about 70 to 75 psi on the air compressor
  • 4 cf/ minute on the air compressor


Plasma Cutting Tutorial


TIG Tutorial Videos

Not the same machine, but its setup the same way

Also:

Start video at 2m53s

Wiring the Plug

Resources