Ironworker Prototype II BOM

.	Type	size	Length	quantity	Part	Total Cost	Source	Cost	Source
.	1018 Flat	1.25x10	17	1	Punch Table
.	1018 Flat	2x4.5	29	2	Vertical Linkages	323	Speedy
.	1018 Plate	3"	9x29	1	Main Linkage
.	1018 Plate	3" thick	27"x66"	1	Upper, lower arms, die holder
.	4130 plate?	7/16"x3	8	1	Punch Pressing Plate
.	A-36 Angle	.5x7x7	10	1	Angle Support
.	A-36 Channel	4", 5.4#	25	2	Frame
.	A-36 Flat	.125"x2"	2	1	Die holder
.	A-36 Flat	.25"x1.25"	4.5	1	die holder
.	A-36 Flat	.25"x2"	4	1	Backstop
.	A-36 Flat	.25x2.5	2.5	8	2" Pins, washers
.	A-36 Flat	.25x3	3	8	2.5" Pins, washers
.	A-36 Flat	.5"x2"	20	1	Flat Clamp
.	A-36 Flat	.5"x8"	9	1	Lower angle Mount
.	A-36 Flat	.75"x10	8	1	Angle Cover Plate
.	A-36 Flat	.75"x5.5"	8.5	1	Punch Guide
.	A-36 Flat	1.125x2.5	3	1	Die holder
.	A-36 Flat	1.75x4.5	19	1	lower flat mount
.	A-36 Flat	1'x3.5"	6.5	2	Punch Linkage
.	A-36 Flat	1"x1.5	9.25	1	Angle Clamp
.	A-36 Flat	1"x3"	7	1	Stripper
.	A-36 Flat	1"x7"	7.5	1	Punch Guide
.	A-36 Flat	1/4"x10	19	1	Lower Flat mount table
.	A-36 Flat	1x2.5	3	1	Die holder
.	A-36 Flat	2"x10"	11.375	1	Lower angle Mount
.	A-36 Flat	2"x3"	20	1	Flat Clamp
.	A-36 Flat	3/16"x3"	20	2	Bottom
.	A-36 Flat	3/16x1	19	1	lower Flat mount table
.	A-36 Flat	3/8"x4"	13	1	Lower Flat mount table
.	A-36 Flat	9/16 (or 5/8 if not available) x 1.5	59.5	2	Frame Side Braces
.	A-36 Plate	1.5"	13.5x15.75	1	Linkage Pin Holder	128	disc
.	A-36 Plate	1.5"	24"x20"	1	Main Pin Supports
.	A-36 Sheet	0.1875	90"	1	Frame
.	CR Round	1.5"	3	1	Punch TR
.	CR Round	1.5"	6	1	Punch Linkage
.	CR Round	2.5"	6	1	Main Linkage Pin
.	CR Round	2.5"	6	1	Main Pin
.	CR Round	2.5"	6.375	1	Punch shaft
.	CR Round	2.5"	7	2	Vertical Linkage Pins
.	CR Round	2"	6	2	Linkage Pin Holder Pins
.	CR Round	2"	6	2	Main pin support pins
.	CR Round	3/8'	4	5	Clamp handles
.	DOM Tubing	1.25"ID 1.5" OD	1	2	Punch Linkage
.	DOM Tubing	1.25"ID 1.5" OD	1.0625	2	Cylinder bushings
.	DOM Tubing	1.25"ID 1.5" OD	3	1	Punch Press
.	DOM Tubing	1.51"ID 1.75"OD	1	2	Punch Linkage
.	DOM Tubing	1.584" ID 1.75OD	3	1	Upper Arm punch linkage
.	DOM Tubing	2.5" ID 3" OD	1.5	2	Main Pin Supports
.	DOM Tubing	2.5"ID 3" OD	3	2	Main Linkage
.	DOM Tubing	2.5"ID 3" OD	3	2	upper arm
.	DOM Tubing	2.5"ID 3"OD	1.5	2	Linkage Pin Holder
.	DOM Tubing	2.5"ID 3"OD	2	4	Vertical Linkages
.	DOM Tubing	2.5"ID 4" OD	2	1	Shaft holder
.	DOM Tubing	2.5"ID 4" OD	2.5	1	Punch guide
.	Pipe	1.25" Sch 40	2	1	Backstop
.	Pipe	1" Sch 10	0.625	3	Clamper for acmes
.	Pipe	1" Sch 40	24	1	Backstop
.	Pipe	3/4" SCH 80	0.5	3	Acme bolt ends (for clamping.
.	Square Tubing	1.5"ODx3/16 wall	26	1	Backstop
.	TR	1"-8	1.5	8	Pins

</html>