MK8 Nozzle
Hint: MK8 1.75mm nozzle works with 3 mm filament on the Lulzbot Mini. Even though the hole is <3mm by the threads, melted 3mm filament has no problem going through the nozzle. Great for parts interoperability. Next day 2 of these nozzles clogged on 2 Lulzbot Minis. Don't know if it's improper settings or nozzles aren't robust.
1.75 mm Filament Nozzle for 3D Printer Extruders
- 0.8 mm nozzle aperture
- M6x1 thread
- Source - [1]
- This source [2] worked with Lulzbot Mini Hexagon hot end
Can 1.75 and 3mm filament be used in one nozzle?
- This one says yes - [3]
