Open Source Laboratory Hardware
Jump to navigation
Jump to search
Basics
- This page covers Existing (ie non-OSE) Designs for OSHW to be used in a Chemistry or Biology Laboratory
Agitation
Rotary Tube Tumbler
Sir Tumbalot v1
- A Design by User "ATinyGreenCell"
- Uses only 3D Printed Components, Bearings, A Rod, and a NEMA Stepper Motor
- The TinkerCAD Page on this Project
- A Hackaday Page on this Project Titled "TUBE TUMBLER PROVIDES THE PERFECT CULTURE"
Nuating Agitator
- A Video by the YouTube Channel "Joshua Pearce" Titled "Open Source 3-D Printed Nutating Mixer" ( ~20 Second Watch )
Orbital Shaker=
- A Thingiverse Page Titled "DIYbio Orbital Shaker V 2.0"
- A Video by the YouTube Channel "Applied Technology Lab" Titled "3D Printed DIYbio Laboratory Orbital Shaker (5 secs)"
Rotator/Shaker
- This device is similar to the "Sir Tumbalot" Design but holds the Tubes perpendicular to the rotation, thus more adapted for shaking
- A Video by the YouTube Channel "Joshua Pearce" Titled "Open Source Lab Sample Rotator Mixer and Shaker - mix and shake" (~15 Second Watch )
Centrifuge
Manual Designs
Open Source Completely 3-D Printable Centrifuge
- A Video by the YouTube Channel "Joshua Pearce" Titled "Open Source Completely 3-D Printable Centrifuge" ( ~30 Second Watch )
- The Appropedia Page on the Project
Motorized Designs
Applied Technology Lab ATL
- A Video by the YouTube Channel "Applied Technology Lab" Titled "3D Printed DIYbio Centrifuge V3 Overview" ( ~2.5 Minute Watch )
- The Thingiverse Page on the Project
Work by "Qosmos Chem"
- A Video by the YouTube Channel "Qosmos Chem" Titled "DIY 3D Printed Centrifuge V2: Tachometer and RPM" ( ~4 Minute Watch )
- A Video by the YouTube Channel "Qosmos Chem" Titled "Speedo Centrifuge: The Ultimate DIY Centrifuge" ( ~ 3 Minute Watch )