Open Source Webcam Kit
Basics
- A device that integrates a webcam, an externa microphone, and a ton of IO into a single usb powered/connected box
- Rear IO is:
1x USB C / Thunderbolt 3 for pc/monitor setup
2x Generic USB C ports for misc peripherals
1x USB C for usb webcam
1x USB C for camera tethering/non webcam camera (this is done using DigiCamControl Software)
1x 12G SDI port for tethering professional cameras via sdi ( this would most likely use a Blackmagic SDI converter and a high quality HDMI capture card)
1x 6G SDI port for tethering professional cameras via sdi ( this would most likely use a Blackmagic SDI converter and a high quality HDMI capture card)
1x 3G SDI port for tethering professional cameras via sdi ( this would most likely use a Blackmagic SDI converter and a high quality HDMI capture card)
1x HDMI in port for hdmi camera tethering, as well as using this device as a streaming pc
1x Gigabit Ethernet Port
- Front IO is:
1x 3.5 mm audio in jack for external unbalanced microphones
1x 6.5 mm audio in jack for external unbalanced microphones
1x XLR audio in jack for balanced external microphones
1x MIDI in jack
1x 3.5 mm audio unbalanced audio out jack for headphones/speakers
1x 6.5 mm unbalanced audio out jack for headphones/speakers
1x 5 Prong XLR balanced audio out jack for headphones/speakers
1x dual 3 prong XLR balanced audio out jack for headphones/speakers
Controls are:
1x Manga Screen
1x On/Off Switch
1x Input Dial
1x Input Mode Dial