Test Power Cube on Tractor
From Open Source Ecology
- Mount Power Cube on one tractor with another tractor or with a hoist
- Mount Power Cube on Tractor
- Connect return line hose, power hose, return line case drain7
- Rumble!!
- Check pressure with pressure gauge on hydraulic take-off channel
- Set pressure for 1500 psi for regular operation, and 2000 psi for hilly terrain
- Test onflat ground
- Test slopes- tractor should be able to navigate any slope with one 27hp power cube
- FeF industry standard is a 1 cu in pump at 3500 rpm
- Determine speed
- If more speed is needed, use a hydraulic pump larger than 1 cu in. With one power cube, tractor will drive faster, but will stall going up steep inclines