The Liberator BOM

From Open Source Ecology
Jump to: navigation, search

Main Frame

Bolts

  • Frame: [16] grade 8, 1/2"x1.5" bolts, with lock washers and nuts
  • Frame: [16] 1/2"x1.5" bolts, with lock washers and nuts
  • Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts
  • Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
  • Hopper edge stubs - [12] 1" stubs or 1/2"x1" bolts, [12] washers, [12] nylon lock nuts.
  • Hopper mount plate - [6] 3/4" nuts, 4 washers, [4] 3/4x1.5" bolts
  • Primary arms: [4] 3/4"x2" bolts, [4] washers, [4] nuts (welded to frame)
  • Attachment of secondary arms to primary arms": [6] 3/4"x2" bolts (4 for cylinder attachment side, 2 for other side) with [6] nuts and [6] washers.
  • Attachment of all adjustable parts: 3/4"x1.5" bolts: [12] for adjustable legs and feet plus nuts; [2] for rear, vertical hopper supports plus nuts;
  • Roller guides - [2] 1/2"x2" with [2] nylon lock nuts
  • Roller guide adjusters - [4] 1/2"x2" bolts with [4] nuts.
  • 8 holes for tables - [8] 1/2"x1/5" bolts, [8] washers, [8] nylon lock nuts
  • Front hopper supports - [2] 3/4"x2" bolts, [2] nuts, [2] washers
  • Soil sensor - [2] 1/2"x2" with [2] nylon lock nuts and [2] washers (attachment); [1] 1/2"x1" with [1] nut; [1] 1/2x2.5" with [1] washer and [1] nylon locknut for the inside; [1] 1/2"x1.5" with [1] nylon locknut and [1] washer
  • Grate mounting:
  • Hopper shaker mounting:
  • Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor

Hopper Shaker

  • Keyed shafting - [1] - $34 for 3 feet; need 6.5"


Controller Electronics