Uploads by Samthetechie
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 01:13, 19 May 2013 | Stock Bonding Plate 8 inches x 16 inches.skp (file) |  |
208 KB | Stock_Bonding_Plate_8_inches_x_16_inches.skp updated part of Backhoe_Boom_in_Sketchup This file addresses this points: 1. All the nominal 1" Holes should be 1-1/16" - this gives a little play for 1" bolts to slip through easily. 1-1/8" is a little too... | 1 |
| 03:39, 19 May 2013 | Stock Pivot Plate.skp (file) | |
133 KB | adjusted 3" hole position as per feedback from Marcin. | 3 |
| 03:49, 19 May 2013 | Stock Spacer Plate 8 inches x 8 inches.skp (file) | |
101 KB | Stock_Spacer_Plate_8_inches_x_8_inches.skp updated part of Backhoe_Boom_in_Sketchup this file revision addresses this point: 1. All the nominal 1" Holes should be 1-1/16" - this gives a little play for 1" bolts to slip through easily. 1-1/8" is a littl... | 1 |
| 12:20, 21 May 2013 | 12 foot stock 4 inch square tube with half inch walls.skp (file) | |
887 KB | This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 12:23, 21 May 2013 | 12 foot stock 4 inch square tube with half inch walls.jpg (file) | Error creating thumbnail: File missing |
128 KB | Screenshot of 12 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 13:19, 21 May 2013 | 11 foot stock 4 inch square tube with half inch walls.skp (file) | |
813 KB | This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:04, 21 May 2013 | 1 foot stock 4 inch square tube with half inch walls.skp (file) | |
134 KB | This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:06, 21 May 2013 | 1 foot stock 4 inch square tube with half inch walls.jpg (file) | Error creating thumbnail: File missing |
128 KB | Screenshot of 1 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:07, 21 May 2013 | 2 foot stock 4 inch square tube with half inch walls.jpg (file) | Error creating thumbnail: File missing |
114 KB | Screenshot of 2 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:10, 21 May 2013 | 2 foot stock 4 inch square tube with half inch walls.skp (file) | |
197 KB | This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:34, 21 May 2013 | 3 foot stock 4 inch square tube with half inch walls.skp (file) | |
261 KB | This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:36, 21 May 2013 | 4 foot stock 4 inch square tube with half inch walls.skp (file) | |
325 KB | This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:36, 21 May 2013 | 5 foot stock 4 inch square tube with half inch walls.skp (file) | |
388 KB | This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:37, 21 May 2013 | 6 foot stock 4 inch square tube with half inch walls.skp (file) | |
452 KB | This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:37, 21 May 2013 | 6 foot stock 4 inch square tube with half inch walls.jpg (file) | Error creating thumbnail: File missing |
107 KB | Screenshot of 6 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:38, 21 May 2013 | 5 foot stock 4 inch square tube with half inch walls.jpg (file) | Error creating thumbnail: File missing |
127 KB | Screenshot of 5 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:38, 21 May 2013 | 4 foot stock 4 inch square tube with half inch walls.jpg (file) | Error creating thumbnail: File missing |
112 KB | Screenshot of 4 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:39, 21 May 2013 | 3 foot stock 4 inch square tube with half inch walls.jpg (file) | Error creating thumbnail: File missing |
131 KB | Screenshot of 3 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:42, 21 May 2013 | 7 foot stock 4 inch square tube with half inch walls.jpg (file) | Error creating thumbnail: File missing |
114 KB | Screenshot of 7 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 14:44, 21 May 2013 | 7 foot stock 4 inch square tube with half inch walls.skp (file) | |
516 KB | This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 16:43, 21 May 2013 | 8 foot stock 4 inch square tube with half inch walls.skp (file) | |
580 KB | This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 16:44, 21 May 2013 | 9 foot stock 4 inch square tube with half inch walls.skp (file) | |
658 KB | This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 16:44, 21 May 2013 | 10 foot stock 4 inch square tube with half inch walls.skp (file) | |
732 KB | This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 17:25, 21 May 2013 | 8 foot stock 4 inch square tube with half inch walls.jpg (file) | Error creating thumbnail: File missing |
124 KB | Screenshot of 8 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 17:25, 21 May 2013 | 9 foot stock 4 inch square tube with half inch walls.jpg (file) | Error creating thumbnail: File missing |
112 KB | Screenshot of 9 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 17:26, 21 May 2013 | 10 foot stock 4 inch square tube with half inch walls.jpg (file) | Error creating thumbnail: File missing |
134 KB | Screenshot of 10 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 17:27, 21 May 2013 | 11 foot stock 4 inch square tube with half inch walls.jpg (file) | Error creating thumbnail: File missing |
140 KB | Screenshot of 11 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 1 |
| 17:44, 21 May 2013 | Backhoe.skp (file) | |
803 KB | This version includes the following changes: *feedback from Marcin: "needs updating to mickey mouse" which includes this file *replaced the two pieces of 8 foot steel stock with updated component model: [[File:8_foot_stock_4_inch_square_tube_with_half_... | 2 |
| 17:48, 21 May 2013 | Backhoe-sketchup.jpg (file) | Error creating thumbnail: File missing |
173 KB | Screenshot of File:Backhoe.skp | 1 |
| 00:35, 22 May 2013 | Stock Pivot Plate 3 inch hole.skp (file) | |
132 KB | This is a variant of File:Stock_Pivot_Plate.skp which has a 3 inch pivot hole instead of a 4.875" hole. Therefore the file addresses *feedback from Marcin: "and then to 3" pivot hole." from Samthetechie_log&oldid=93850#Output | 1 |
| 00:44, 22 May 2013 | Stock Pivot Plate 3 inch hole.jpg (file) | Error creating thumbnail: File missing |
157 KB | Screenshot of File:Stock_Pivot_Plate_3_inch_hole.skp stock pivot plate with a 3" hole rather than a 4.875" hole which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup | 2 |
| 13:35, 25 May 2013 | Force sketchup hw accel.reg (file) | |
129 bytes | Fixes the 'SketchUp was unable to initalize OpenGL' bug when running Sketchup under Wine on Linux | 1 |
| 13:36, 25 May 2013 | Disable welcome.reg (file) | |
105 bytes | Fixes the bug when running Sketchup under Wine on Linux where SketchUp crashes on start with no error message by forcing off the "Welcome to SketchUp" dialog | 1 |
| 13:37, 25 May 2013 | Disable instructor.reg (file) | |
101 bytes | Fixes the bug when running Sketchup under Wine on Linux where SketchUp crashes on or shortly after startup; either the main window is displayed, or you have already disabled the Welcome screen by forcing off the "Snappy Instructor" dialog. | 1 |
| 18:16, 25 May 2013 | Backhoe With Articulated Pivot.skp (file) | |
3.39 MB | Backhoe_With_Articulated_Pivot.skp was created to address point 3. "Add articulated pivot" of Backhoe_Development_Brief. Screenshot here: File:Backhoe_With_Articulated_Pivot.jpg | 1 |
| 18:31, 25 May 2013 | Backhoe With Articulated Pivot.jpg (file) | Error creating thumbnail: File missing |
244 KB | Screenshot of Backhoe_With_Articulated_Pivot.skp | 1 |
| 22:24, 25 May 2013 | Reinforced Backhoe With Articulated Pivot.skp (file) | |
3.56 MB | A Reinforced version of File:Backhoe_With_Articulated_Pivot.skp | 1 |
| 22:28, 25 May 2013 | Reinforced Backhoe With Articulated Pivot.jpg (file) | Error creating thumbnail: File missing |
175 KB | A screenshot of File:Reinforced_Backhoe_With_Articulated_Pivot.skp | 1 |
| 22:36, 25 May 2013 | 3DLifeTracAndBackhoe.jpg (file) | Error creating thumbnail: File missing |
370 KB | Screenshot of File:3DLifeTracAndBackhoe.skp | 1 |
| 22:42, 25 May 2013 | 3DLifeTracAndBackhoe.skp (file) | |
19.48 MB | This is an example arrangement of mounting the File:Reinforced_Backhoe_With_Articulated_Pivot.skp onto the File:3DLifeTrac.skp. Screenshot: 800px | 1 |
| 23:10, 25 May 2013 | SHS.jpg (file) | Error creating thumbnail: File missing |
5 KB | Diagram of SHS (Square Hollow Section) | 1 |
| 02:46, 26 May 2013 | Articulated Pivot.skp (file) | |
1.42 MB | This is part of the Backhoe and is attached between the File:Boom.skp and the File:Pivot_Mounting_Plate.skp Screenshot: 800px | 1 |
| 02:47, 26 May 2013 | Articulated Pivot.jpg (file) | Error creating thumbnail: File missing |
252 KB | Screenshot of File:Articulated_Pivot.skp | 1 |
| 03:38, 26 May 2013 | Samthetechie.jpg (file) | Error creating thumbnail: File missing |
7 KB | 1 | |
| 16:11, 1 June 2013 | Closeup3DLifeTracAndBackhoe.jpg (file) | Error creating thumbnail: File missing |
437 KB | Shows 1' 3" height | 1 |
| 23:03, 1 June 2013 | Hydraulic Cylinder 2.5 inch bore 36 inch stroke.skp (file) | |
446 KB | =Warnings/Caveats= This model is only intended to show the retracted and extended distance between the mountings of the hyrdaulic cylinder. It should be noted that model is only a work in progress and a lot of the finer details of the geometry are not ... | 1 |
| 23:03, 1 June 2013 | Hydraulic Cylinder 2.5 inch bore 36 inch stroke.jpg (file) | Error creating thumbnail: File missing |
117 KB | =Warnings/Caveats= This model is only intended to show the retracted and extended distance between the mountings of the hyrdaulic cylinder. It should be noted that model is only a work in progress and a lot of the finer details of the geometry are not ... | 1 |
| 17:21, 15 June 2013 | 3x30x1.50 DIA CYL.skp (file) | |
512 KB | *Sketchup Model of the 30" stroke cylinder as per: https://www.surpluscenter.com/item.asp?item=9-8262-30&catname=hydraulic *Retracted Length is: 40 1/4 " *Extended Length is 70 1/4 " *Stroke is 30" *Screenshot 800px | 1 |
| 17:22, 15 June 2013 | 3x30x1.50 DIA CYL.jpg (file) | Error creating thumbnail: File missing |
135 KB | Screenshot of sketchup model of hydraulic cylinder: File:3x30x1.50_DIA_CYL.skp | 1 |
| 20:38, 15 June 2013 | Boom.skp (file) | |
555 KB | Change from 8 foot to six foot and moved the pivot plates as per Samthetechie_log#Sat.2C_Jun_15.2C_2013 | 2 |
