Quality Control Assessment: Difference between revisions
Jump to navigation
Jump to search
(Created page with "This is a general quality control checklist for heavy machinery. =Design= #Were some parts of the tractor too big or too small? #What design changes and additions should be ...") |
No edit summary |
||
| Line 2: | Line 2: | ||
=Design= | =Design= | ||
#Were some parts | #Were some parts too big or too small? | ||
#Were there parts that did not fit? Explain. | |||
#What design changes and additions should be made for the next iteration of a build? | #What design changes and additions should be made for the next iteration of a build? | ||
#Did the machine have the expected power or performance? | #Did the machine have the expected power or performance? | ||
| Line 11: | Line 12: | ||
#Do all pins have a head on one side and a cotter pin on the other? | #Do all pins have a head on one side and a cotter pin on the other? | ||
=Welding and | =Welding and Fasteners= | ||
# | #Discuss any welds that failed inspection? | ||
#Did all the bolts fit as expected? If not, pleas explain what prevented them from fitting. | |||
=Hydraulics= | =Hydraulics= | ||
#Did any hydraulic fittings or hoses leak? How was this corrected? | #Did any hydraulic fittings or hoses leak? How was this corrected? | ||
# | #Did all motors and cylinders work? | ||
#Were the correct fittings used? Which fittings should be replaced? | #Were the correct fittings used? Which fittings should be replaced? | ||
#Were there any fittings that did not work and had to be modified? | #Were there any fittings that did not work and had to be modified? | ||
#Were there any cylinder tabs that had to be modified because | #Were there any cylinder tabs that had to be modified because | ||
Revision as of 02:44, 17 July 2013
This is a general quality control checklist for heavy machinery.
Design
- Were some parts too big or too small?
- Were there parts that did not fit? Explain.
- What design changes and additions should be made for the next iteration of a build?
- Did the machine have the expected power or performance?
Mechanical
- Did all the parts fit together as expected? If not, please explain.
- Were sharp edges and exposed rough torching areas ground down with a grinder?
- Do all pins have a head on one side and a cotter pin on the other?
Welding and Fasteners
- Discuss any welds that failed inspection?
- Did all the bolts fit as expected? If not, pleas explain what prevented them from fitting.
Hydraulics
- Did any hydraulic fittings or hoses leak? How was this corrected?
- Did all motors and cylinders work?
- Were the correct fittings used? Which fittings should be replaced?
- Were there any fittings that did not work and had to be modified?
- Were there any cylinder tabs that had to be modified because