LifeTrac 6 Parts Order: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
 
(23 intermediate revisions by one other user not shown)
Line 1: Line 1:
=Order=


*Change notes:  
 
:*modified pivot plates with rounded part shortened
<html><iframe width='1000' height='350' frameborder='0' src='https://docs.google.com/spreadsheet/pub?key=0Ai5ioldYa6LLdDBsNEFqTDkyVlRhOWZ6c1FKOXVUcmc&output=html&widget=true'></iframe></html>
 
[https://docs.google.com/a/opensourceecology.org/spreadsheet/ccc?key=0Ai5ioldYa6LLdDBsNEFqTDkyVlRhOWZ6c1FKOXVUcmc#gid=0 edit/comment]
 
 
Using [[BOM Template]]:
 
<html><iframe width=100% height='500' frameborder='0' src='https://docs.google.com/spreadsheet/pub?key=0ArpE5Y9PpJCXdE8ta3lldFhxQXJhTFViaVNhUFAxcXc&output=html&widget=true'></iframe></html>
 
[https://docs.google.com/a/opensourceecology.org/spreadsheet/ccc?key=0ArpE5Y9PpJCXdE8ta3lldFhxQXJhTFViaVNhUFAxcXc#gid=0 edit]
 
 
==Cloverdale Manufacturing Order Instructions==
See [[Cloverdale Manufacturing Order Instructions]]. This is the parts file (DXF drawings) for ordering items 1-11 above: [[File:CloverdaleLifeTrac6.zip]]
 
Checklist:
 
*Flat plate is mild steel, 1/2" thick
*Holes are 1-1/8" (except for item #4)
*Square tubing is 1/4"x4"x4" - in 10 foot lengths
:*First hole is 2 inches on center away from the edge, and all spacing is 4" between holes
:*All 4 sides of tubing are cut the same, so that holes are directly opposite from one another, and distance of the hole on each of the four sides is identical for each of the four sides. Note: 2 of the 45 tubes ordered last time were not good.
 
=Quick attach wheel mount plates for the 1 7/8" shaft size=
 
See reference picture - [[Mike_Hill_6_in_60_Metal_Order#Parts]]
 
*[8] Part 2 [[File:wheelmodule2.dxf]]
*[8] Part 4 [[File:wheelmodule4.dxf]]
*[8] Part 5 [[File:direct5.dxf]]
*[8] Part 7 [[File:wheelmodule7.dxf]]
*[8] Part 8 [[File:wheelmodule8.dxf]]
*[8] Part 10 [[File:wheelmodule10.dxf]]
*[8] Part 11 [[File:lt6wheelmodule11.dxf]]
 
=Change Log=
*Change Log since [[6 in 60 Part Ordering]]:  
:*Pivot plates were modified - rounded part was shortened
:*All holes increased by 1/16" to 1-1/8" to facilitate bolting
:*All holes increased by 1/16" to 1-1/8" to facilitate bolting
:*.dxf file showing the 30 holes on 4" centers that appear in a 10' 4x4 tube
:*.dxf file showing the 30 holes on 4" centers that appear in a 10' 4x4 tube
:*The wheel mount plates are also modified per previous discussions, i.e. Holes for option of direct bolting to the 4x4s.  
:*The wheel mount plates are also modified per previous discussions, i.e. Holes for option of direct bolting to the 4x4s.  
:*Re motor plate of the wheel The plates that the motor is bolted to were completely incorrect (MJ note: incorrect only if Motor Interface plate is not used, which it isn't) to accommodate the [[45.6 Cu In Motors]]. I made the corrections and made a new .dxf file (attached).
:*Re motor plate of the wheel The plates that the motor is bolted to were completely incorrect (MJ note: incorrect only if Motor Interface plate is not used, which it isn't) to accommodate the [[45.6 Cu In Motors]]. I made the corrections and made a new .dxf file (attached).
Marcin, please confirm this order and let Katie know:
*[48] pieces of 1/2"x8"x16" mild steel plate - Stock Bonding Plate. Note bolt holes are 1-1/8" - intended for 1" bolts.Weight - 17.8 ea or about 855 lb total.
*[25] pieces of nominal 1/2"x8"x16" mild steel plate - (Modified) Stock Pivot Plate. Note bolt holes are 1-1/8" - intended for 1" bolts. About 385 lb.
*[20] pieces of 1/4"x4"x4" square tubing - 10' long. 400' total. Note bolt holes are 1-1/8" - intended for 1" bolts, every 4" on center, first hole at 2" from the end on center. Total weight about 2660 lb.
=quick attach wheel mount plates for the 1 7/8" shaft size=
*[8]
*[8]
*[8]
*[8]
*[8]
*[8]
*[8]

Latest revision as of 18:07, 3 September 2013

Order

edit/comment


Using BOM Template:

edit


Cloverdale Manufacturing Order Instructions

See Cloverdale Manufacturing Order Instructions. This is the parts file (DXF drawings) for ordering items 1-11 above: File:CloverdaleLifeTrac6.zip

Checklist:

  • Flat plate is mild steel, 1/2" thick
  • Holes are 1-1/8" (except for item #4)
  • Square tubing is 1/4"x4"x4" - in 10 foot lengths
  • First hole is 2 inches on center away from the edge, and all spacing is 4" between holes
  • All 4 sides of tubing are cut the same, so that holes are directly opposite from one another, and distance of the hole on each of the four sides is identical for each of the four sides. Note: 2 of the 45 tubes ordered last time were not good.

Quick attach wheel mount plates for the 1 7/8" shaft size

See reference picture - Mike_Hill_6_in_60_Metal_Order#Parts

Change Log

  • Pivot plates were modified - rounded part was shortened
  • All holes increased by 1/16" to 1-1/8" to facilitate bolting
  • .dxf file showing the 30 holes on 4" centers that appear in a 10' 4x4 tube
  • The wheel mount plates are also modified per previous discussions, i.e. Holes for option of direct bolting to the 4x4s.
  • Re motor plate of the wheel The plates that the motor is bolted to were completely incorrect (MJ note: incorrect only if Motor Interface plate is not used, which it isn't) to accommodate the 45.6 Cu In Motors. I made the corrections and made a new .dxf file (attached).
Retrieved from "https://wiki.opensourceecology.org/index.php?title=LifeTrac_6_Parts_Order&oldid=106074"