Weld Deposition Rates: Difference between revisions

Revision as of 16:26, 24 June 2014

"1/4 (6 mm) fillet welds" made on parts > 5 mm, are made at weld travel speeds of 18 to 23 inch/min." - [1]
Calculating weld travel speed - [2] - 5-15 IPM for 1/2" steel, fillet weld

Revision as of 16:19, 24 June 2014 (view source) Marcin (talk \| contribs) No edit summary ← Older edit		Revision as of 16:26, 24 June 2014 (view source) Marcin (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
	*"1/4 (6 mm) fillet welds" made on parts > 5 mm, are made at weld travel speeds of 18 to 23 inch/min." - [http://www.weldreality.com/spray_transfer_above100.htm]		*"1/4 (6 mm) fillet welds" made on parts > 5 mm, are made at weld travel speeds of 18 to 23 inch/min." - [http://www.weldreality.com/spray_transfer_above100.htm]
	*Calculating weld travel speed - [http://www.fabricatingandmetalworking.com/2010/12/pre-calculating-wire-feed-speed-travel-speed-and-voltage/]		*Calculating weld travel speed - [http://www.fabricatingandmetalworking.com/2010/12/pre-calculating-wire-feed-speed-travel-speed-and-voltage/] - 5-15 IPM for 1/2" steel, fillet weld