Prusa i3 Development: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 11: | Line 11: | ||
=Sourcing Issues= | =Sourcing Issues= | ||
*According to [http://reprap.org/wiki/Jhead] - cheap chinese J Head counterfeits do not work - so make sure the hot end works | *According to [http://reprap.org/wiki/Jhead] - cheap chinese J Head counterfeits do not work - so make sure the hot end works | ||
*J Head exists from the original manufacturer - $56 - but shipping is a flat rate. Takes 48 hours to ship, but shipping method is unspecified. Need to contact seller to see if they can provide fast shipping. | |||
Revision as of 21:04, 19 January 2016
Process
Links
Sourcing with Shipping
- Under $350 for full kit, shipping is 3-5 days - [3]. Uses J Head Nozzle. Ships "i3 rework" design: [4]
- Review of Replikeo [5]
Sourcing Issues
- According to [6] - cheap chinese J Head counterfeits do not work - so make sure the hot end works
- J Head exists from the original manufacturer - $56 - but shipping is a flat rate. Takes 48 hours to ship, but shipping method is unspecified. Need to contact seller to see if they can provide fast shipping.