Jonathan Prusa i3 Build: Difference between revisions
Jump to navigation
Jump to search
Line 28: | Line 28: | ||
*[3] m3x20 | *[3] m3x20 | ||
*[3] lock washers | *[3] lock washers | ||
#23:10 for time - :50 over world record |
Revision as of 03:18, 13 March 2016
Module 1
- [12] l brackets.
- [24] set screws
- [14] m4 Tnuts
- [8] m5 Tnuts
- [6] small washers - note that they should be larger as they fall through.
- [4] square blocks
- [2] rounded blocks
- [6] corner brackets
- [2] shortest smooth rods
- [2] longest smooth rods
- [1]
- Larger washers
- [4] m4x14 bolts for rounded blocks
- [6] m4x8 panhead bolts for idler and power supply
- 5:54 to put in the set to set screws. Definitely needs to use technique.
- Forgot to add the vertical l-brackets - was taken apart.
- 58 minutes to the idler.
Module 2 - Extruder Carriage
- [7] bearings
- [6] zip ties
- [3] 3D printed pieces
- [1] stepper motor
- [1] pulley
- [2] bearings
- [1] m3x16
- [3] m3x20
- [3] lock washers
- 23:10 for time - :50 over world record