3D Printer First Run: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
=Proposed Procedure= | =Proposed Procedure= | ||
*Check extruder motor - move the z motor on interface. M302 to enable cold run of extruder. | *Check extruder motor - move the z motor on interface. M302 to enable cold run of extruder. | ||
*Check x, y, and z motor | :*Stick in some filament - check that extrude sucks filament in, and reverse takes it out | ||
*Check x, y, and z motor. | |||
*Home x | |||
*Home y | |||
*Home z | |||
*Check heating of bed | *Check heating of bed | ||
*Check heating of extruder | *Check heating of extruder | ||
*Hit Home Overall to get 3 homing positions. | *Hit Home Overall to get 3 homing positions. | ||
*Calibrate 4 corners | |||
*Print calibration cube. | |||
=Links= | =Links= | ||
*[[3D Printer Quality Control Interface]] | *[[3D Printer Quality Control Interface]] | ||
Latest revision as of 20:50, 16 March 2016
Proposed Procedure
- Check extruder motor - move the z motor on interface. M302 to enable cold run of extruder.
- Stick in some filament - check that extrude sucks filament in, and reverse takes it out
- Check x, y, and z motor.
- Home x
- Home y
- Home z
- Check heating of bed
- Check heating of extruder
- Hit Home Overall to get 3 homing positions.
- Calibrate 4 corners
- Print calibration cube.