Latest revision as of 03:20, 23 March 2017

Notes

Initial upload has .2" width.
Proper dimensions should be done based on US Steel gauge + Metric steel gauge
Design should allow for accurate fit (up to +/- 1/2 mm corner fit accuracy)
Make gap 1/2 mm oversized (0.05") so steel fits in I made it 1mm oversize (0.04")
Gap should fit several frame gauges: 14, 12, 11, 10,
Make it such that the gap is stepped in the piece so that the same piece can be used for all frame sizes
Steel Gauge -frame

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	03:18, 23 March 2017	(35 KB)	Polemidis (talk \| contribs)	steps for different gauges cut corner
	12:53, 21 March 2017	(15 KB)	Polemidis (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

@@ Line 1: / Line 1: @@
+=Notes=
+*Initial upload has .2" width.
+*Proper dimensions should be done based on US Steel gauge + Metric steel gauge
+*Design should allow for accurate fit (up to +/- 1/2 mm corner fit accuracy)
+*Make gap 1/2 mm oversized (0.05") so steel fits in '''I made it 1mm oversize (0.04")'''
+*Gap should fit several frame gauges: 14, 12, 11, 10,
+*Make it such that the gap is stepped in the piece so that the same piece can be used for all frame sizes
+*[[Steel Gauge]] -frame
+:*10 - 0.1345
+:*11 - 0.1196
+:*12 - 0.1046
+:*13 - 0.0897
+:*14 - 0.0747