File:D3D frame assembly guide.fcstd: Difference between revisions
Jump to navigation
Jump to search
(Polemidis uploaded a new version of File:D3D frame assembly guide.fcstd) |
No edit summary |
||
| Line 3: | Line 3: | ||
*Proper dimensions should be done based on US Steel gauge + Metric steel gauge | *Proper dimensions should be done based on US Steel gauge + Metric steel gauge | ||
*Design should allow for accurate fit (up to +/- 1/2 mm corner fit accuracy) | *Design should allow for accurate fit (up to +/- 1/2 mm corner fit accuracy) | ||
*Make gap 1/2 mm oversized (0.05") so steel fits in | *Make gap 1/2 mm oversized (0.05") so steel fits in '''I made it 1mm oversize (0.04")''' | ||
*Gap should fit several frame gauges: 14, 12, 11, 10, | *Gap should fit several frame gauges: 14, 12, 11, 10, | ||
*Make it such that the gap is stepped in the piece so that the same piece can be used for all frame sizes | *Make it such that the gap is stepped in the piece so that the same piece can be used for all frame sizes | ||
Latest revision as of 03:20, 23 March 2017
Notes
- Initial upload has .2" width.
- Proper dimensions should be done based on US Steel gauge + Metric steel gauge
- Design should allow for accurate fit (up to +/- 1/2 mm corner fit accuracy)
- Make gap 1/2 mm oversized (0.05") so steel fits in I made it 1mm oversize (0.04")
- Gap should fit several frame gauges: 14, 12, 11, 10,
- Make it such that the gap is stepped in the piece so that the same piece can be used for all frame sizes
- Steel Gauge -frame
- 10 - 0.1345
- 11 - 0.1196
- 12 - 0.1046
- 13 - 0.0897
- 14 - 0.0747
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 03:18, 23 March 2017 | (35 KB) | Polemidis (talk | contribs) | steps for different gauges cut corner |
| 12:53, 21 March 2017 | (15 KB) | Polemidis (talk | contribs) |
You cannot overwrite this file.
File usage
The following page uses this file: