CEB Press Controller v17.08: Difference between revisions
Jump to navigation
Jump to search
| Line 39: | Line 39: | ||
[https://docs.google.com/drawings/d/1oW8M_2zTL2WhdBVOBDlx8sNVcLj--e0mlWJrJRTb_x8/edit drive] | [https://docs.google.com/drawings/d/1oW8M_2zTL2WhdBVOBDlx8sNVcLj--e0mlWJrJRTb_x8/edit drive] | ||
*(2) four position .1" connector [https://www.pololu.com/product/1903] | |||
*(1) five position .1" connector [https://www.pololu.com/product/1904] | |||
*(1) six position .1" connector [https://www.pololu.com/product/1905] | |||
=Links= | =Links= | ||
*[[CEB Press Controller Genealogy]] | *[[CEB Press Controller Genealogy]] | ||
Revision as of 00:03, 31 August 2017
Working Document
Bill of Materials
- https://www.pololu.com/product/1905
- 4 Channel Relay Switch Module
- https://www.adafruit.com/product/1445
- Zener Diode
- Resistor 10K
- Diode
- on/off switch, 2 connectors grainger
Diagram
Arduino with OSE Controller Board
- Based on 2014 work of CEB Press 6 - Controller Module - Electronics Layout
- See build instructions - CEB Press 6 Controller
arduino + relay w/ plain wire
arduino + relay module + DPDT switches w/ plain wire
DPDT Switches used to operate solenoids and send 5v signal to arduino that solenoid is engaged, or auxilary use.
- (2) four position .1" connector [1]
- (1) five position .1" connector [2]
- (1) six position .1" connector [3]