CEB Press Controller v17.08: Difference between revisions
Jump to navigation
Jump to search
| Line 59: | Line 59: | ||
*(4) PG-7 Cable Glands 0.11" to 0.25" [https://www.grainger.com/product/HUBBELL-WIRING-DEVICE-KELLEMS-Nylon-Cable-Connector-2DPF8 Grainger] | *(4) PG-7 Cable Glands 0.11" to 0.25" [https://www.grainger.com/product/HUBBELL-WIRING-DEVICE-KELLEMS-Nylon-Cable-Connector-2DPF8 Grainger] | ||
**1/2" hole | **1/2" hole | ||
*(4) PG-7 Lock Nuts [https://www.grainger.com/product/product/HUBBELL-WIRING-DEVICE-KELLEMS-Cord-Connector-Locknut-2DZH4 Grainger] | |||
==arduino + relay module + DPST push button switches w/ ethernet CAT5 cable== | ==arduino + relay module + DPST push button switches w/ ethernet CAT5 cable== | ||
Revision as of 02:04, 23 September 2017
Working Document
Bill of Materials
- https://www.pololu.com/product/1905
- 4 Channel Relay Switch Module
- https://www.adafruit.com/product/1445
- Zener Diode
- Resistor 10K
- Diode
- on/off switch, 2 connectors grainger
- (3) cable gland adafruit digikey
Diagram
Arduino with OSE Controller Board
- Based on 2014 work of CEB Press 6 - Controller Module - Electronics Layout
- See build instructions - CEB Press 6 Controller
arduino + relay w/ plain wire
arduino + relay module + DPDT toggle switches w/ plain wire
DPDT Switches used to operate solenoids and send 5v signal to arduino that solenoid is engaged, or auxilary use.
- (2) 6P DPST toggle switch grainger
- (9) one position .1" connector [1]
- (2) four position .1" connector [2]
- (1) five position .1" connector [3]
- (1) six position .1" connector [4]
- (6) M-F crimped .1" cable [5] [6]
- (8) M-M crimped .1" cable [7] [8]
arduino + relay module + DPST push button switches w/ plain wire
- (4) push button 4P DPST switch digikey waytek
- 13/16" hole
- (16) 0.187 Female Quick Connect Insulated Terminals Mouser
- (4) PG-7 Cable Glands 0.11" to 0.25" Grainger
- 1/2" hole
- (4) PG-7 Lock Nuts Grainger