CEB Press Controller v17.08

Working Document

edit

Bill of Materials

• https://www.pololu.com/product/1905
  • 0.1"_Housings
• 4 Channel Relay Switch Module
  • RobotShop
  • sainsmart amazon ebay
  • Shield Option RobotShop
• https://www.adafruit.com/product/1445
• on/off switch, 2 connectors grainger
• (3) cable gland adafruit digikey

tools

• Step bit with 13/16 cut Grainger

Diagram

Arduino with OSE Controller Board

• Based on 2014 work of CEB Press 6 - Controller Module - Electronics Layout
• See build instructions - CEB Press 6 Controller

arduino + relay w/ plain wire

drive

arduino + relay module + DPDT toggle switches w/ plain wire

DPDT Switches used to operate solenoids and send 5v signal to arduino that solenoid is engaged, or auxilary use.

drive

• (2) 6P DPST toggle switch grainger

• (9) one position .1" connector [1]
• (2) four position .1" connector [2]
• (1) five position .1" connector [3]
• (1) six position .1" connector [4]
• (6) M-F crimped .1" cable [5] [6]
• (8) M-M crimped .1" cable [7] [8]

arduino + relay module + DPST push button switches w/ plain wire

gdrive

• (4) push button 4P DPST switch digikey waytek
  • 13/16" hole
• (16) 0.187 Female Quick Connect Insulated Terminals Mouser
• (4) PG-7 Cable Glands 0.11" to 0.25" Grainger
  • 1/2" hole
• (4) PG-7 Lock Nuts Grainger

arduino + relay module + DPST push button switches w/ ethernet CAT5 cable

gdrive

Troubleshooting

https://docs.google.com/presentation/d/1K_Scbv3mZxef9kGwv5TDlSBf7z-veDFiJ-uB1RL6Soc/edit#slide=id.g1861bf60d5_0_6

Links

• CEB Press Controller Genealogy