MicroTrac Controller v17.10: Difference between revisions
Jump to navigation
Jump to search
| Line 34: | Line 34: | ||
===Wiring Harnesses=== | ===Wiring Harnesses=== | ||
<html><img src="https://docs.google.com/drawings/d/e/2PACX-1vS1bsyew6FrFeTIowGBREkFNyaHytuKrkaet02cOeShsXXErm0SreGNMChNe0LNOonROlaxdAIaOqiq/pub?w=600"> | |||
</html> | |||
[https://docs.google.com/drawings/d/1gF79PS3_41_QYwmSCp6R0PnMSqNSXjToYMvHQ8mkbp4/edit gdrive] | |||
=Future Work= | =Future Work= | ||
Revision as of 16:43, 27 October 2017
Used to control the hydraulic system of MicroTrac.
See the arduino code that runs inside this controller box.
Goals
- Remotely control solenoid valves
- Transmit signals from remotely located control box to onboard control box
- Broadcast GPS location and compass heading from MicroTrac
- Determine suitability of different wireless standards and hardware
- Wifi Shield
- xbee long range
Tentative BOM
- Arduino Mega
- xbee Long Range mouser
- Arduino wireless shield mouser arduino store
- 8 Channel Relay Module
- (4) 6P DPST toggle switch grainger
- (5) 4-way Trailer Connector Grainger
- GPS Module Sparkfun
- GPS Antenna Sparkfun
- Compass breakout board sparkfun
- (2) RP-SMA F-M Cable digikey
- 900Mhz Antenna Sparkfun
Wiring Diagram
Wiring Harnesses
Future Work
- Remotely control throttle
- Remotely shut down or start engine
- Integrate with GPS functionality