Talk:Raspberry Pi Phone: Difference between revisions
(Added some discussion on possible module connection via USB and problems that may cause.) |
(Asked if our CNC circuit mill could make custom circuits for this project, and listed some advantages of doing so.) |
||
| Line 10: | Line 10: | ||
- How much power is outputted by a raspberry pi USB port? I was thinking modules could be all connected by USB, but we may run into power issues if we don't use an externally powered ( possibly by the battery module ) USB hub. | - How much power is outputted by a raspberry pi USB port? I was thinking modules could be all connected by USB, but we may run into power issues if we don't use an externally powered ( possibly by the battery module ) USB hub. | ||
- Could our "D3D CNC Circuit Mill" make an arduino/raspberry pi clone for this project? That way we could get better IO (Such as USB C, Exact Dimensions we need, and maybve more processing power if different chipsets are used. | |||
Revision as of 21:50, 12 November 2017
- On the subject of screens there is a device called the "manga screen" it is fully open source both in hardware and software. It is around the dimensions of a phone screen, has either a 720p or a 1080p screen, and is multitouch capable. It also uses standard USB and HDMI, no weird connectors. It may be worth a look, and here are some links.
http://wiki.thing-printer.com/index.php?title=Manga_Screen
https://www.thing-printer.com/product/manga-screen/
- How much power is outputted by a raspberry pi USB port? I was thinking modules could be all connected by USB, but we may run into power issues if we don't use an externally powered ( possibly by the battery module ) USB hub.
- Could our "D3D CNC Circuit Mill" make an arduino/raspberry pi clone for this project? That way we could get better IO (Such as USB C, Exact Dimensions we need, and maybve more processing power if different chipsets are used.