Metal 3D Printing: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 9: | Line 9: | ||
=Print and Sinter Filaments= | =Print and Sinter Filaments= | ||
*You can print with regular plastic filament. [http://www.thevirtualfoundry.com/about/] | *You can print with regular plastic filament. [http://www.thevirtualfoundry.com/about/] | ||
*You can print in clay and then bake. | *You can print in clay and then bake. See [[Metal Clay Printer]]. | ||
Revision as of 01:33, 12 February 2018
Proprietary
- Desktop metal - [1]
- Robots + Mig Welders - [2]. Cost of MIG wire is $2/lb, so overall cost is reasonable. Imagine 3D metal printing for rebar forms combined with Clay Extrusion to make rebar reinforced Earthen Construction all with industrial robots.
Open Source
- MTU early MIG-welder based printer - [3]
- Part release mechanisms - [4]
Print and Sinter Filaments
- You can print with regular plastic filament. [5]
- You can print in clay and then bake. See Metal Clay Printer.