LiPo Charger USB v18.02: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 25: Line 25:
*Male Jumper Wires
*Male Jumper Wires


*Panel Mount - optional [https://www.mouser.com/ProductDetail/TE-Connectivity/1954646-1?qs=TL6PIybY3BOn0Sc7npaHPA%3d%3d mouser]
*USB B Panel Mount - [https://www.mouser.com/ProductDetail/167-PX0842-B mouser]
**Panel Mount Cover - [https://www.mouser.com/ProductDetail/157-PX0733 mouser]


*On/Off/On DPDT Toggle Switch [https://www.grainger.com/product/HONEYWELL-Toggle-Switch-24D439 grainger]
*On/Off/On DPDT Toggle Switch [https://www.grainger.com/product/HONEYWELL-Toggle-Switch-24D439 grainger]

Revision as of 23:46, 6 June 2018

Overview

Lithium polymer battery unit. Charges and maintains battery from USB 5V, output 5V over USB, allows data to pass through.

Goals

  • No need to remove for basic operations
    • Charge through panel mounted USB port
    • Upload Arduino skectches through USB port
    • On off switch

Tentative BOM

  • LiPo Charger "Battery Babysitter" Sparkfun
  • Female Headers
  • Male Jumper Wires

Case

3D printed to mount and encase circuit boards in a end-user-friendly manner.

Scad
 

Wiring Diagram

edit

See Also