File:Jb1.3 2018-05 jellyJarAndLabel.jpg: Difference between revisions
Jump to navigation
Jump to search
(Photo shows two pieces of the jellybox 1.3 3d printer. These plexiglass pieces need to be attached one-on-top-of-the-other. To assist the user in attaching the pieces with the correct orientation, the jellybox team etched a glass jar on one of the piec...) |
(No difference)
|
Latest revision as of 17:58, 26 June 2018
Photo shows two pieces of the jellybox 1.3 3d printer. These plexiglass pieces need to be attached one-on-top-of-the-other. To assist the user in attaching the pieces with the correct orientation, the jellybox team etched a glass jar on one of the pieces and "jelly" label (for the jar) on the other piece such that, when the pieces are aligned properly, the glass jar has the "jelly" label affixed to it. This was absolutely brilliant as it is very clear & obvious to builders of all ages & skill levels--and it totally transcends language.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 17:58, 26 June 2018 |  | 1,024 × 768 (99 KB) | Maltfield (talk | contribs) | Photo shows two pieces of the jellybox 1.3 3d printer. These plexiglass pieces need to be attached one-on-top-of-the-other. To assist the user in attaching the pieces with the correct orientation, the jellybox team etched a glass jar on one of the piec... |
You cannot overwrite this file.
File usage
The following page uses this file:
