D3D v18.06 Future Work: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*Implement Trinamic drivers *Optimize geometry for print volume *Do complete CAD *Laser cut electronics mounting board *Put a boot on the extruder heater *Implement nonlinear...") |
No edit summary |
||
| Line 5: | Line 5: | ||
*Put a boot on the extruder heater | *Put a boot on the extruder heater | ||
*Implement nonlinear bed correction | *Implement nonlinear bed correction | ||
*Optimize bed mounting | *Optimize bed mounting for heat resistance - kapton tape may work without adding one extra part to part count | ||
*Motor piece can be truncated to allow for more space on the x and y axes, thereby allowing a 13" frame to suffice for an 8" bed. This is useful for small size printers. | |||
Revision as of 22:46, 27 June 2018
- Implement Trinamic drivers
- Optimize geometry for print volume
- Do complete CAD
- Laser cut electronics mounting board
- Put a boot on the extruder heater
- Implement nonlinear bed correction
- Optimize bed mounting for heat resistance - kapton tape may work without adding one extra part to part count
- Motor piece can be truncated to allow for more space on the x and y axes, thereby allowing a 13" frame to suffice for an 8" bed. This is useful for small size printers.