D3D v18.06 Future Work: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
*Implement Trinamic drivers | *Implement Trinamic drivers | ||
*Optimize geometry for print volume - increase size as needed to gain exactly 8x8" of print area, and make this frame size an option for laser cutter and CNC circuit mill. | *Optimize geometry for print volume - increase size as needed to gain exactly 8x8" of print area, and make this frame size an option for laser cutter and CNC circuit mill. | ||
:*Determine range of motion via CAD to determine practicality | |||
*Do complete CAD | *Do complete CAD | ||
*Laser cut electronics mounting board | *Laser cut electronics mounting board | ||
Latest revision as of 15:27, 30 June 2018
- Implement Trinamic drivers
- Optimize geometry for print volume - increase size as needed to gain exactly 8x8" of print area, and make this frame size an option for laser cutter and CNC circuit mill.
- Determine range of motion via CAD to determine practicality
- Do complete CAD
- Laser cut electronics mounting board
- Put a boot on the extruder heater
- Implement nonlinear bed correction
- Optimize bed mounting for heat resistance - kapton tape may work without adding one extra part to part count
- Motor piece can be truncated to allow for more space on the x and y axes, thereby allowing a 13" frame to suffice for an 8" bed. This is useful for small size printers.