Revision as of 18:15, 15 July 2018

Sat Jul 14, 2018

See Harman Bains for Pitch.

Uploading my Dev Test files today

Installation took about 45 minutes, I didn't install on the machine I used it in Live mode which sped things up
Learning FreeCAD and making the cube took about 6 hours
Documenting took another 4
Total hours: 11

Most Difficult Section: navigating the wiki to find all the stuff I needed to do. The application is scattered over multiple pages and intermixed with the Immersion program application.
Other Feedback: There needs to be better requirements for the cube, that includes images of what the completed cube should look like, as well as what kind of nut and bolt to use (ISO 4014 Screw with M27 Diameter and 220 length and ISO 4032 Nut with M27 Diameter

FreeCAD file: File:Harman Cube Test.fcstd

FreeCAD-Test Video:[1]

@@ Line 7: / Line 7: @@
 [[Harman Log]]. [[Harman Bains]].
-Uploading my Dev Test files today, it was completed earlier though, just didn't have access until now
+Uploading my Dev Test files today
+*Installation took about 45 minutes, I didn't install on the machine I used it in Live mode which sped things up
+*Learning FreeCAD and making the cube took about 6 hours
+*Documenting took another 4
+*Total hours: 11
+*'''Most Difficult Section:''' navigating the wiki to find all the stuff I needed to do. The application is scattered over multiple pages and intermixed with the Immersion program application.
+*'''Other Feedback:''' There needs to be better requirements for the cube, that includes images of what the completed cube should look like, as well as what kind of nut and bolt to use (ISO 4014 Screw with M27 Diameter and 220 length and ISO 4032 Nut with M27 Diameter
 '''FreeCAD file:''' [[File:Harman_Cube_Test.fcstd]]
 '''FreeCAD-Test Video''':[https://youtu.be/bq_bErZhx8E]