Revision as of 13:25, 7 September 2018

Notes

20:22 in the video - Collet Clip - see E3D Instructions regarding the Collet Clip. Note that because the filament hole in the extruder 3D printed piece is elongated - and the collet clip is elongated - the collet clip should sit in this hole in a way that allows the collet clip to line up with the hole.

Revision as of 13:24, 7 September 2018 (view source) Marcin (talk \| contribs) No edit summary ← Older edit		Revision as of 13:25, 7 September 2018 (view source) Marcin (talk \| contribs) No edit summary Newer edit →
Line 2:		Line 2:

	=Notes=		=Notes=
	*Collet Clip - see E3D Instructions regarding the Collet Clip. Note that because the filament hole in the extruder 3D printed piece is elongated - and the collet clip is elongated - the collet clip should sit in this hole in a way that allows the collet clip to line up with the hole.		*20:22 in the video - Collet Clip - see E3D Instructions regarding the Collet Clip. Note that because the filament hole in the extruder 3D printed piece is elongated - and the collet clip is elongated - the collet clip should sit in this hole in a way that allows the collet clip to line up with the hole.