Microfactory Boot Camp - Extruder Build: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
*29:37 - motor attachment | *29:37 - motor attachment | ||
*31:36 - tensioner with m40 screws | *31:36 - tensioner with m40 screws | ||
*33:24 - print cooling fan | |||
Revision as of 13:52, 7 September 2018
Notes
- 20:22 in the video - Collet Clip - see E3D Instructions regarding the Collet Clip. Note that because the filament hole in the extruder 3D printed piece is elongated - and the collet clip is elongated - the collet clip should sit in this hole in a way that allows the collet clip to line up with the hole.
- 24:50 - location of drive gear
- 25:29 - placing extruder cover on top of the extruder
- 25:53 - fan nuts in cover need to be placed inside extruder cover
- 29:37 - motor attachment
- 31:36 - tensioner with m40 screws
- 33:24 - print cooling fan