Simple 3D Printer BOM: Difference between revisions

Revision as of 17:06, 14 October 2018

This is a simplified version of the OSE 3D Printer:

Small 6" bed
Bed is not heated. Don't need PEI, large power supply, or MOSFET
One Z axis with cantilevered Z axis
Retains the RepRap Discount Smart Controller for easy interface
3D printed linear bearings - since we are still using our strong motors, there should be no issue with using PLA printed linear bearings even if there is extra friction
Smaller power supply, as there is no need to heat the bed
Frame is PVC with 3D printed corners
Need to design axis holders that clamp onto the PVC for mounting the Y and Z axes
3D printed control panel mount
Needs to determine a workable, low cost extruder

@@ Line 1: / Line 1: @@
+This is a simplified version of the OSE 3D Printer:
+#Small 6" bed
+#Bed is not heated. Don't need PEI, large power supply, or MOSFET
+#One Z axis with cantilevered Z axis
+#Retains the RepRap Discount Smart Controller for easy interface
+#3D printed linear bearings - since we are still using our strong motors, there should be no issue with using PLA printed linear bearings even if there is extra friction
+#Smaller power supply, as there is no need to heat the bed
+#Frame is PVC with 3D printed corners
+#Need to design axis holders that clamp onto the PVC for mounting the Y and Z axes
+#3D printed control panel mount
+#Needs to determine a workable, low cost extruder
 <html><iframe src="https://docs.google.com/spreadsheets/d/e/2PACX-1vTjgpalGOYhiJvYZWtk1uzvIHJbv1xWwI_C5uL5l2CEQ7LwC2VOlTolbhCEYbLvRK-WPr5qoq3LRGud/pubhtml?widget=true&amp;headers=false" height=500 width=500></iframe></html>
 [https://docs.google.com/spreadsheets/d/1mk5ZR0VsOITZ9_Xey7kpfnd98FxMuWpsZEn5FyggOas/edit#gid=0 edit]