Revision as of 22:56, 12 November 2018

Print Cooling Fan

Adding a print cooling fan. Use these part libraries

File:5015blower.fcstd
Nema 17 Faceplate sketch - File:Nema17face.fcstd
Marcin's Titan Aero sensor holder - File:Titanaeromarcin.fcstd - not finished. Finished - File:Titanaeromarcin.stl
To this, add a fan mount for a print cooling fan - File:Fanwithholderpattern.fcstd
Aleph Objects has produced a FreeCAD version of the Titan Aero extruder - [1]. See Mirrored_aero_assem.fcstd file

Download in FreeCAD format - [7]

[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl

@@ Line 7: / Line 7: @@
 *To this, add a fan mount for a print cooling fan - [[File:fanwithholderpattern.fcstd]]
 *[[File:titanwithblower.png|500px]]
+*Aleph Objects has produced a FreeCAD version of the Titan Aero extruder -  [http://devel.lulzbot.com/TAZ/accessories/angelfish/AERO_STEP_FILES/]. See Mirrored_aero_assem.fcstd file
+[[File:Titanearo.jpg|500px]]
+==Part Library==
+*Overall library - [https://github.com/OpenSourceEcology/3D-Printer-Part-Library]
+*8 mm sensor - [https://github.com/OpenSourceEcology/3D-Printer-Part-Library/blob/master/8mmsensor.fcstd]
+*8 mm sensor holder - [https://github.com/OpenSourceEcology/3D-Printer-Part-Library/blob/master/8mmsensor_holder.fcstd]
+*Heater block only - [https://github.com/OpenSourceEcology/3D-Printer-Part-Library/blob/master/volcano.fcstd]
+*Unmirrored Titan Aero extruder - [https://github.com/OpenSourceEcology/3D-Printer-Part-Library/blob/master/unmirrored.fcstd]
 Download in FreeCAD format - [https://github.com/OpenSourceEcology/3D-Printer-Part-Library/blob/master/holder%20%2B%20motor%20%2B%20Titan.fcstd]