File:Motor interface.fcstd
Motor_interface.fcstd (file size: 30 KB, MIME type: application/zip)
Warning: This file type may contain malicious code.
By executing it, your system may be compromised.
Version Notes
- May 28, 2018 version is modified for the Titan Aero extruder so blower can fit on the underside.
- Feb 18 version is missing the notch for the stepper motor connector, so the stepper motor doesn't fit as is.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Dimensions | User | Comment | |
---|---|---|---|---|
current | 00:18, 1 June 2018 | (30 KB) | Marcin (talk | contribs) | Extruder mount with 8 mm distance sensor holder for the Titan Aero motor grab |
03:08, 29 May 2018 | (27 KB) | Marcin (talk | contribs) | Compounded version of last file. | |
23:33, 28 May 2018 | (29 KB) | Marcin (talk | contribs) | ||
01:11, 28 April 2017 | (377 KB) | Polemidis (talk | contribs) | moved the holes towards the center about 3mm Added side holes | |
02:35, 18 March 2017 | (353 KB) | Polemidis (talk | contribs) | fixed motor-hold holes size to fit M6 screw | |
12:18, 7 March 2017 | (353 KB) | Polemidis (talk | contribs) | increased cable adaptor cut lenght, moved the nut catchers | |
12:54, 6 March 2017 | (354 KB) | Polemidis (talk | contribs) | redesigned to correct orientation | |
20:48, 2 March 2017 | (358 KB) | Polemidis (talk | contribs) | 1mm wider motor cut | |
05:11, 2 March 2017 | (355 KB) | Polemidis (talk | contribs) | Adaptor cut made | |
14:03, 18 February 2017 | (341 KB) | Polemidis (talk | contribs) |
- You cannot overwrite this file.
File usage
The following 6 pages link to this file: