Kit Production Ergonomics: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 4: Line 4:
=Kit Requirements - Production Side=
=Kit Requirements - Production Side=
A solderless, quality-controlled kit requires these elements/preparation steps, which are all quality controlled.:
A solderless, quality-controlled kit requires these elements/preparation steps, which are all quality controlled.:
#Workspace and Tooling
#3D printed parts
#3D printed parts
#Wiring extended and all soldering complete
#Wiring extended and all soldering complete
#Electronics tested - motors, heaters, end stops, controller
#Electronics tested - motors, heaters, end stops, controller
#Rods cut to size
#Cut list: Rods cut to size, Heat bed parts cut to size
#Bolts prepared
#Bolts prepared
#Heat bed parts cut to size
#Packaging
#
#Tools
#Packing List
#Quality control checklist
#Serial number and online quality assurance documentation
#OSE label
 
=Workspace=
<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vTgPinX-KRfBfUlSe9kdjdI2Vep84V8q2NZMmw5ZEHZMzUtOUrhyVER3SOcDLzQQ6YevR2yEcBHP1qm/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>
 
[https://docs.google.com/presentation/d/1fcMjuHC805jLxOtID-c12vOwzaGxdshbxPMuQ31jaFI/edit#slide=id.g4071900322_0_32 edit]

Revision as of 20:39, 3 December 2018

Introduction

OSE is pursuing the open source economy, based on distributed production and Distributed Quality Control. OSE's paradigm follows the social business model of Distributive Enterprise. Social Business is used here as in Muhammad Yunus's definition.

Kit Requirements - Production Side

A solderless, quality-controlled kit requires these elements/preparation steps, which are all quality controlled.:

  1. Workspace and Tooling
  2. 3D printed parts
  3. Wiring extended and all soldering complete
  4. Electronics tested - motors, heaters, end stops, controller
  5. Cut list: Rods cut to size, Heat bed parts cut to size
  6. Bolts prepared
  7. Packaging
  8. Tools
  9. Packing List
  10. Quality control checklist
  11. Serial number and online quality assurance documentation
  12. OSE label

Workspace

edit