3D Printed Chuck: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*A decent chuck can be 3D printed for low force applications - [https://www.google.com/search?q=3D+printed+chuck&client=ubuntu&hs=x8E&tbm=isch&source=iu&ictx=1&fir=7MimczJm_FW...") |
(Added some thoughts of mine) |
||
| Line 1: | Line 1: | ||
*A decent chuck can be 3D printed for low force applications - [https://www.google.com/search?q=3D+printed+chuck&client=ubuntu&hs=x8E&tbm=isch&source=iu&ictx=1&fir=7MimczJm_FWFiM%253A%252Cf5Qz5GLZBf0qVM%252C_&usg=AI4_-kTw0_40XbtkKEe_z2_icjLO_vRPZw&sa=X&ved=2ahUKEwio4KjzrdffAhVNpoMKHWUDC_IQ9QEwD3oECAUQDA#imgrc=bsRmdyAgHFs1yM:] | *A decent chuck can be 3D printed for low force applications - [https://www.google.com/search?q=3D+printed+chuck&client=ubuntu&hs=x8E&tbm=isch&source=iu&ictx=1&fir=7MimczJm_FWFiM%253A%252Cf5Qz5GLZBf0qVM%252C_&usg=AI4_-kTw0_40XbtkKEe_z2_icjLO_vRPZw&sa=X&ved=2ahUKEwio4KjzrdffAhVNpoMKHWUDC_IQ9QEwD3oECAUQDA#imgrc=bsRmdyAgHFs1yM:] (Strength of this design probably could be greatly improved with a good nylon or polycarbonate (maybe even composite with carbon fiber) 3d printing filament. Tempering the parts after printing may help too. -Eric) | ||
*See a drill chuck - with a push drill - [https://www.thingiverse.com/thing:792988] | *See a drill chuck - with a push drill - [https://www.thingiverse.com/thing:792988] | ||
Latest revision as of 21:01, 6 January 2019
- A decent chuck can be 3D printed for low force applications - [1] (Strength of this design probably could be greatly improved with a good nylon or polycarbonate (maybe even composite with carbon fiber) 3d printing filament. Tempering the parts after printing may help too. -Eric)
- See a drill chuck - with a push drill - [2]