Precious Plastic Extruder

Working Doc

Hint: This work builds upond the precious work of Precious Plastic. We are indebted here to Dave Hakkens. See https://preciousplastic.com/en/videos/download.html

edit

BOM

• Wood bit - 1" - [1]. 7/16" shank, as in 1/2" version. Local - [2]
• Pipe flange - Menards $5 - [3]
• Pipe flange - pack of 10 - Amazon - $4 ea - [4]
• 1" pipe -

OSE Version Design Rationale

• Slow auger version powered by a Nema 17 with large auger.
• Vertical hang to reduce auger power requirement
• Remove flow control screw and rely on temperature and auger speed instead. PP version doesn't have speed control on motor, so motor control produces additional control required here

Calculations

• We want low speed equivalent to a strong corded drill such as [5].

.

• Torque Calculator

CAD - OSE Version

• This is the OSE version remake. See https://github.com/OpenSourceEcology/Extruder

Filament Extruder

• 

  Overall Build - FreeCAD -File:Filamenter overall.fcstd

• 

  Overall Build - FreeCAD -File:Filamenter motor.fcstd

• 

  Auger - FreeCAD -File:Filamenter auger.fcstd

• 

  Auger - FreeCAD -File:Filamenter bearing.fcstd

• 

  Auger - FreeCAD -File:Filamenter flowcontrol.fcstd

Extruder Controller

• 

  Overall Build - FreeCAD -File:Filamenter controller.fcstd

BOM Candidates

• Insulator brick - [6]
• Carbon fiber welding blanket insulation - [7]
• Small high torque hydraulic motor - [8] $50
• Type K Thermocouple - [9] - $7
• SSR - [10] - $7
• 1" flange - $4 on amazon - [11] or $5 menards - [12]
• PID Controller - $23 - [13]
• PID with SSR + thermocouple - $14 - [14] - got 3.
• [3] band heaters - 35x45 mm - $4 + SH - [15]
• [1] band heater - 1.75" for next coupler
• 1-3/4" coupler - [16]
• 1.75" heater - [17]

Notes

• 1.75" is 45 mm
• 35 mm is 1.38 in
• 40 mm is 1.57 inches
• OD of pipe union
• 1.25" and 1.75" nozzle heaters are available easily - [18]