Highest 3D Printer Resolution: Difference between revisions
Jump to navigation
Jump to search
(Created page with "https://3dinsider.com/high-resolution-3d-printers/ *20 microns layer resolution, consistently achievable - is the highest - with Ultimaker. *Rest including Prusa and Lulzbot...") |
|||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
=Experimental= | |||
*TU Wien is the record holder - a fully detailed castle on the tip of a pencil - [https://amt.tuwien.ac.at/] | |||
=Consumer= | |||
https://3dinsider.com/high-resolution-3d-printers/ | https://3dinsider.com/high-resolution-3d-printers/ | ||
*20 microns layer resolution, consistently achievable - is the highest - with Ultimaker. | *20 microns layer height resolution, consistently achievable - is the highest - with Ultimaker and 0.4mm nozzle. Note that resolution is only 60 micron with 0.25 mm nozzle, which is a reflection of the Bowden design (long extruder to head distance) | ||
*Rest including Prusa and Lulzbot are at 50 microns. | *Rest including Prusa and Lulzbot are at 50 microns. | ||
*'''Question''' - if positioning accuracy is 10 microns at current 16 microstepping + RAMPS, maximum resolution can be down to 10 microns. | |||
Latest revision as of 17:42, 9 April 2019
Experimental
- TU Wien is the record holder - a fully detailed castle on the tip of a pencil - [1]
Consumer
https://3dinsider.com/high-resolution-3d-printers/
- 20 microns layer height resolution, consistently achievable - is the highest - with Ultimaker and 0.4mm nozzle. Note that resolution is only 60 micron with 0.25 mm nozzle, which is a reflection of the Bowden design (long extruder to head distance)
- Rest including Prusa and Lulzbot are at 50 microns.
- Question - if positioning accuracy is 10 microns at current 16 microstepping + RAMPS, maximum resolution can be down to 10 microns.