3D Printed Organizing Drawers: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
=OSE Requirements= | =OSE Requirements= | ||
*Requires printer with minumum 18-20" bed. | |||
*Drawers and cabinets serve for storage + easy transportability | *Drawers and cabinets serve for storage + easy transportability | ||
*Cabinet + drawers so that drawers can be taken out, or entire cabinets can be moved | *Cabinet + drawers so that drawers can be taken out, or entire cabinets can be moved | ||
Revision as of 16:10, 17 April 2019
OSE Requirements
- Requires printer with minumum 18-20" bed.
- Drawers and cabinets serve for storage + easy transportability
- Cabinet + drawers so that drawers can be taken out, or entire cabinets can be moved
- Drawers should be 6-8" tall, about 14 wide, and about 18" long
- Transportability: Corresponding cabinets should stack 3 drawers (18"-24") for carrying by hand
- 2 Cabinets should lock together verticaly for rolling on wheels - so a person can take 6 of these at a time
- Wheels can be printed as planetary gear wheels, just a shaft is required.
- Max stacking is 3 cabinets tall (6' tall)
- Minimal rails so that entire cabinet can serve as storage for taller objects with object in tray spanning 2 or 3 drawer spaces
Industry Standards
- Printed at larger size - these can be perfect organizing systems.
- Walls are too thick if printed at much larger size - not optimized for fast prints.