Spark Ignitor: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 17: Line 17:
*10kV $37 amazon - [https://www.amazon.com/dp/B07GSFNNDG/ref=psdc_5538124011_t1_B07DF8WG63]
*10kV $37 amazon - [https://www.amazon.com/dp/B07GSFNNDG/ref=psdc_5538124011_t1_B07DF8WG63]
*Spark Ignitor - $20 amazon - [https://www.amazon.com/Protech-62-24164-01-Direct-Ignition-Ignitor/dp/B008KPKX5O/ref=sr_1_1?keywords=spark+ignitor&qid=1571528896&s=hi&sr=1-1]
*Spark Ignitor - $20 amazon - [https://www.amazon.com/Protech-62-24164-01-Direct-Ignition-Ignitor/dp/B008KPKX5O/ref=sr_1_1?keywords=spark+ignitor&qid=1571528896&s=hi&sr=1-1]
*Spark ignitor - $14 amazon prime - [https://www.amazon.com/Atwood-93868-Water-Heater-Replacement/dp/B07MKH9THG/ref=sr_1_9?keywords=spark+ignitor&qid=1571528963&s=hi&sr=1-9#customerReviews]


=Specs=
=Specs=

Revision as of 23:50, 19 October 2019

  • Spark ignitor from a kitchen gas lighter. Used to run IC model engines - honed by hand! - https://www.youtube.com/watch?v=09R6teBOlco
  • Push button spark ignitor for gas grill - [1]
  • One suggestion - run a stepper motor with an eccentric to push a pushbutton ignitor. Or, run a 12 v spark ignitor.
  • Piezo igniter - [2]
  • Spark electrode - [3]
  • Spark gap ignitor - up to 1/2" gap between wires - [4]
  • SparkFun spark gap ignitor - [5]

Sourcing

  • Grill ignitor on AA battery with a momentary switch - [6]. $30.
  • Silicon nitride electrode - [7]
  • 3kV Neon sign transformer - $11 - 30ma - [8]
  • Ignitor with 35" wire - [9]
  • 400kV at 5V - may be a good idea at 5V - coming from the Universal Controller - [10]
  • $7 on Amazon - [11]
  • 10kV Neon transformer - $34 - [12]
  • 10kV $37 amazon - [13]
  • Spark Ignitor - $20 amazon - [14]
  • Spark ignitor - $14 amazon prime - [15]

Specs

  • 30kV/cm breakdown gap for air - [16]
  • Piezo igniter is only 800V - [17]
  • Ignitor for pressure washer - 15kV, 20ma - 300W?
  • Ignition transformer - 10kV, 20 ma - [18]. $70
  • 10kV neon transformer - $40 - [19]
  • This one says 30kV is required for Direct Spark Igniter - [20]