Spring Steel Wire: Difference between revisions
Jump to navigation
Jump to search
(Created page with "In the D3D Universal 3D printer extruder, we are using 1.25 mm spring steel - or 0.05 inch wire. Welding wire is 0.035" - close to this - at 70ksi. Spring steel wire is...") |
No edit summary |
||
| Line 1: | Line 1: | ||
In the [[D3D Universal]] 3D printer extruder, we are using 1.25 mm spring steel - or 0.05 inch wire. | In the [[D3D Universal]] 3D printer extruder, we are using 1.25 mm spring steel - or 0.05 inch wire. | ||
Welding wire is 0.035" - close to | Welding wire is 0.035" - close to the diameter - but much lower strength - at 70ksi. | ||
Spring steel wire is 260 ksi - about 4x stronger! [https://www.mcmaster.com/8907k89] | Spring steel wire is 260 ksi - about 4x stronger! [https://www.mcmaster.com/8907k89] | ||
Revision as of 20:17, 17 November 2019
In the D3D Universal 3D printer extruder, we are using 1.25 mm spring steel - or 0.05 inch wire.
Welding wire is 0.035" - close to the diameter - but much lower strength - at 70ksi.
Spring steel wire is 260 ksi - about 4x stronger! [1]