G Codes in Marlin: Difference between revisions
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
**D0 is the first most convenient at AUX ports - see Mega pins - [https://wiki.opensourceecology.org/wiki/File:Megapins.png] | **D0 is the first most convenient at AUX ports - see Mega pins - [https://wiki.opensourceecology.org/wiki/File:Megapins.png] | ||
**For 2 adjacent pins with ground - use GND - D63. | **For 2 adjacent pins with ground - use GND - D63. | ||
**Thus - to turn on a gas solenoid for the [[CNC Torch Table v19.10]], use M42 P63 S55. To turn it off, set state to 0. | |||
=Links= | =Links= | ||
Revision as of 05:20, 28 November 2019
See list at the Marlin site - http://marlinfw.org/meta/gcode/
Top Used
IO Pin Activation
- M42 - [1] - Ex: M42 P5 S255 (set digital pin 5 to on). Internet sez: For a non-PWM digital pin you need to put S0 (or any value <128) to turn off and S255 (or any value >=128) to turn on.
- Which pins are available?
- D0 is the first most convenient at AUX ports - see Mega pins - [2]
- For 2 adjacent pins with ground - use GND - D63.
- Thus - to turn on a gas solenoid for the CNC Torch Table v19.10, use M42 P63 S55. To turn it off, set state to 0.
![[2]](https://wiki.opensourceecology.org/wiki/File:Megapins.png){kind=link}