Revision as of 10:48, 23 December 2019

Value Proposition

24V system has less overheating issues and allows for higher speed of motion
1.2 nozzle comes stock stock for stronger, faster printing up to 10x faster than using standard nozzles. Comes with 0.8 and 0.4 nozzles for finer detail.
1. Provide extrusion rate data.
Stock 1.2 nozzle allows for 20 degree overhang angle, for example with 0.4 layer height with a 1.2 nozzle
Marlin Inside - most popular and well-supported firmware
Open source RAMPS v1.4 controller
Comes with volcano heater block
Uses magnetically-attached flexible spring steel build plate with Buildtak for quick release of finished prints
Arduino IDE-powered firmware uploads
Ready upgrade to 120V fast insulated PEI heatbed for eco-friendly 30% energy savings over standard heated beds
Uses modular Universal Axis system
Ready upgrade to 12"x12" print bed using a single additional z axis
Ready upgrade to D3D Pro version allows reuse of Universal Controller and all Universal Axis parts
INCLUDES plotter quick-attach tool head that converts your 3D printer to a plotter in seconds
INCLUDES a CNC hole drilling spindle for making circuit through-holes
Innovative belt drive on Z axis allows faster motion and elimination risk of destroying the print surface
OSE-design open source extruder comes with Automatic bed leveling inductive sensor, print cooling fan.
Clog-free design uses open filament pathway for fixing any clog in seconds
Machine comes with blueprints for upgrading to a
Only 3D printer in the world with an Unlimited Lifetime Guarantee.

The only printer in the world:

with which you join an OSPD movement and a development project to change the world
with an Unlimited Lifetime Guarantee
with an insulated heatbed for 30% energy savings
That comes stock with 1.2 nozzle for fast printing
Uses a modular construction system, the Universal Axis, that is is highly scalable to larger size (100x) and higher tool torque (1000x). See beam deflection calculator for using 8 mm rods compared to 3" rods for the Universal Axis - Beam Deflection Calculator - for a practical case of a 12" long 8 mm rod system vs a 24" long 3 inch rod system.

@@ Line 26: / Line 26: @@
 #with an insulated heatbed for 30% energy savings
 #That comes stock with 1.2 nozzle for fast printing
-#Uses a modular construction system, the [[Universal Axis]], that is is highly scalable to larger size (100x) and higher tool torque (9000x). See beam deflection calculator for using 8 mm rods compared to 3" rods for the Universal Axis - [[Beam Deflection Calculator]].
+#Uses a modular construction system, the [[Universal Axis]], that is is highly scalable to larger size (100x) and higher tool torque (1000x). See beam deflection calculator for using 8 mm rods compared to 3" rods for the Universal Axis - [[Beam Deflection Calculator]] - for a practical case of a 12" long 8 mm rod system vs a 24" long 3 inch rod system.