Distributed Production Engineering Documentation Protocol: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=3D Printing= 2 rules: #Document files at the part library, where part library has the FreeCAD and STL #Save the gcode #State the official machine version used. Unofficial ma...") |
(No difference)
|
Latest revision as of 09:15, 9 January 2020
3D Printing
2 rules:
- Document files at the part library, where part library has the FreeCAD and STL
- Save the gcode
- State the official machine version used. Unofficial machine versions are not supported. An official machine version is accompanied by a specific version of Marlin firmware that is documented for that machine. See Wiki Taxonomy.
- Save the printer profile (.ini file)