3D Printed Linear Bushing: Difference between revisions
No edit summary |
|||
| Line 1: | Line 1: | ||
=Notes= | |||
The spiral bearing design by open source [[Chris Log]] (based on a proprietary design) can be engineered for different force specifications. If we can replace a $30 bronze sleeve bearing, that means $600 savings for the drive system right in the bearings. Note that [[Plastic Gears are the Future]], and likewise, high performance, high temperature plastics can go far in replacing metal counterparts. Plastic is 10x weaker than steel, but still - 5-10 ksi compressive strength of plastic is not insignificant. | |||
It is useful to develop 8, 25, 50, and 75 mm versions (8 mm to 3" shaft) of these bushings for rapid prototyping, and possible applications even in tractor drive. | |||
=Part Library= | |||
<gallery perrow=5> | <gallery perrow=5> | ||
File:SpiralLinearBearing.PNG|'''Spiral linear bearing - uploaded openscad code, stl is too big. unzip and compile''' -[[File:SpiralLinearBearing.zip]] - One full set has been printed and is installed on a D3D here to be tested | File:SpiralLinearBearing.PNG|'''Spiral linear bearing - uploaded openscad code, stl is too big. unzip and compile''' -[[File:SpiralLinearBearing.zip]] - One full set has been printed and is installed on a D3D here to be tested | ||
Revision as of 01:28, 16 February 2020
Notes
The spiral bearing design by open source Chris Log (based on a proprietary design) can be engineered for different force specifications. If we can replace a $30 bronze sleeve bearing, that means $600 savings for the drive system right in the bearings. Note that Plastic Gears are the Future, and likewise, high performance, high temperature plastics can go far in replacing metal counterparts. Plastic is 10x weaker than steel, but still - 5-10 ksi compressive strength of plastic is not insignificant.
It is useful to develop 8, 25, 50, and 75 mm versions (8 mm to 3" shaft) of these bushings for rapid prototyping, and possible applications even in tractor drive.
Part Library
Spiral linear bearing - uploaded openscad code, stl is too big. unzip and compile -File:SpiralLinearBearing.zip - One full set has been printed and is installed on a D3D here to be tested
Industry Standards
- For 3" diameter shaft - High force low speed bushing, oil-embedded bronze bushing - $32 for 3" long - [1], down to $15 for 1.25" long