Zinc: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Added some more links under the "See Also" section)
(Fixed an internal link)
Line 2: Line 2:
*An element with an atomic number of 30
*An element with an atomic number of 30
*Low melting temp metal (420C) which can be used for a stovetop foundry. See [[Stovetop Metal Casting]].
*Low melting temp metal (420C) which can be used for a stovetop foundry. See [[Stovetop Metal Casting]].
*It is very useful, especially for [[Cathodic Protection]] either as a sacrificial anode, or via [[Galvanisation]]
*It is very useful, especially for [[Cathodic Protection]] either as a sacrificial anode, or via [[Galvanization]]
*Some batteries use zinc
*Some batteries use zinc
*Used in some alloys
*Used in some alloys

Revision as of 01:04, 27 February 2020

Basics

  • An element with an atomic number of 30
  • Low melting temp metal (420C) which can be used for a stovetop foundry. See Stovetop Metal Casting.
  • It is very useful, especially for Cathodic Protection either as a sacrificial anode, or via Galvanization
  • Some batteries use zinc
  • Used in some alloys

Sourcing

Commercial Methods of Production

Sulphate Source

  • Use Froth Floatation to seperate the zinc sulphates out
  • Then once isolated they are smelted producing sulphur dioxide and pure (ish) zinc
  • This supposedly produces quite a bit of nast stuff such ascadmium, copper, arsenic, antimony, cobalt, germanium, nickel, and thallium in the leach product. SO if done small scale WASTE MANAGMENT WILL BE A BIG ISSUE WITH THIS METHOD , unless puro zinc sulfide is used in which case a good water Wet Scrubber is all that is need, and the system would co-produce Sulphric Acid

Zinc Oxide Source

DIY

Non-Zinc Oxide Sources

  • Dripping a zince droplet from inside a penny - easy experiment with a torch and pennies. Dropping is nice and pure zinc. [4]
  • Not cost effective.
  • It is cost effective to use a small furnace with a steel mesh, so zinc drips out the bottom, and copper shells stay on top. - [5]
  • Casting zinc rings - nice and clean just using pennies on a spoon + mold - [6]
  • Melting zinc, with mini foundry - [7]
  • Melting pennies on a stove is messy - [8]

Zinc Oxide Sources

  • The simpler method, althoug availability may be more of an issue
  • Smelting

See Also

Useful Links