D3D v20.04 Data Collection: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 2: | Line 2: | ||
*DRV 8825 is used for more current on Z. [https://www.pololu.com/product/2982/specs] | *DRV 8825 is used for more current on Z. [https://www.pololu.com/product/2982/specs] | ||
*Initially, one side motor on Z was 44 mm long (17PM-K402-P4V Minebea Motor Mfg Corp, V and A not shown), and the other was 48 mm long (17PM-K402-P5VS, 3.9V 1.3A). *Small motor was easy to stop - pound or 2, whereas larger motor was more like 10lb to stop. | *Initially, one side motor on Z was 44 mm long (17PM-K402-P4V Minebea Motor Mfg Corp, V and A not shown), and the other was 48 mm long (17PM-K402-P5VS, 3.9V 1.3A). *Small motor was easy to stop - pound or 2, whereas larger motor was more like 10lb to stop. | ||
=Heating Time= | |||
*Extruder - at 11C from 11C to 230C - 2:15 | |||
*Bed - 2:47 at 11C from 11C-100C, 20C hysteresis at top | |||
=Links= | =Links= | ||
*[[D3D_v20.04]] | *[[D3D_v20.04]] | ||
Revision as of 05:15, 20 April 2020
Stepper Drivers
- DRV 8825 is used for more current on Z. [1]
- Initially, one side motor on Z was 44 mm long (17PM-K402-P4V Minebea Motor Mfg Corp, V and A not shown), and the other was 48 mm long (17PM-K402-P5VS, 3.9V 1.3A). *Small motor was easy to stop - pound or 2, whereas larger motor was more like 10lb to stop.
Heating Time
- Extruder - at 11C from 11C to 230C - 2:15
- Bed - 2:47 at 11C from 11C-100C, 20C hysteresis at top