Custom Fabrication Exam: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Welding test on mild steel: #Weld two 1/8" steel flatsat right angles to a tee post over 6' lenght #Welding two 1/4 slabs together at right angle to make an angle for 6" length ...") |
(No difference)
|
Revision as of 19:28, 20 April 2011
Welding test on mild steel:
- Weld two 1/8" steel flatsat right angles to a tee post over 6' lenght
- Welding two 1/4 slabs together at right angle to make an angle for 6" length
- welding two 1" slabs together, butted to each other flat along a 6" length
Torching test on mild steel:
- Torching 1/8" steel over 12 inches length
- Torching a 1" slab, over 12 inch length