3D Printed Linear Bushing: Difference between revisions
Line 18: | Line 18: | ||
=Other Available Designs= | =Other Available Designs= | ||
*Customizable, Thingiverse [https://www.thingiverse.com/thing:2202854 [[File:ccnc.png|20px]] | *Customizable, Thingiverse [https://www.thingiverse.com/thing:2202854 [[File:ccnc.png|20px]] | ||
**This one is 4g at 100% [[file:4g.png|30px]] | **This one is 4g at 100% [[file:4g.png|30px]], 6 minutes. 10 per hour, 240/day - $120/day revenue generation if sold at 50 cents each. | ||
=Links= | =Links= | ||
*[[Spiral Vase Linear Bearing]] | *[[Spiral Vase Linear Bearing]] | ||
*[[Linear Bearings]] | *[[Linear Bearings]] |
Revision as of 16:39, 4 June 2020
Notes
The spiral bearing design by open source Chris Log (based on a proprietary design) can be engineered for different force specifications. If we can replace a $30 bronze sleeve bearing, that means $600 savings for the drive system right in the bearings. Note that Plastic Gears are the Future, and likewise, high performance, high temperature plastics can go far in replacing metal counterparts. Plastic is 10x weaker than steel, but still - 5-10 ksi compressive strength of plastic is not insignificant.
It is useful to develop 8, 25, 50, and 75 mm versions (8 mm to 3" shaft) of these bushings for rapid prototyping, and possible applications even in tractor drive applications.
Build
Part Library
Spiral linear bearing - uploaded openscad code, stl is too big. unzip and compile -File:SpiralLinearBearing.zip - One full set has been printed and is installed on a D3D here to be tested
Industry Standards
- For 3" diameter shaft - High force low speed bushing, oil-embedded bronze bushing - $32 for 3" long - [1], down to $15 for 1.25" long
Other Available Designs
- Customizable, Thingiverse [https://www.thingiverse.com/thing:2202854