Latest revision as of 16:27, 22 June 2020

Basics

Prusament
Main points are:
- +/- 0.02mm tolerance (thus VERY repeatable/reliable)
- QR Code Based Data for all of THAT BATCH's Parameters

See build of Lyman Filament Maker from 2018.

Dr. Pearce from MOST has done a good review. Take the leads at https://www.appropedia.org/Recyclebot#Other_types_of_RecycleBots and evaluate the candidates for the 5 practical points of Distributive Enterprise Assessment. These leads are shown below:

@@ Line 1: / Line 1: @@
+=Basics=
+*The [[Industry Standards]] for the [[Open Source Filament Maker]]
+=Prusament=
+*[[Prusament]]
+*Main points are:
+** +/- 0.02mm tolerance (thus VERY repeatable/reliable)
+** QR Code Based Data for all of THAT BATCH's Parameters
+=OSE Work=
+See build of [[Lyman Filament Maker]] from 2018.
 =[[Distributive Enterprise Assessment]]=
-Take the leads at https://www.appropedia.org/Recyclebot#Other_types_of_RecycleBots and evaluate the candidates for the 5 practical points of [[Distributive Enterprise Assessment]].
+Dr. Pearce from [[MOST]] has done a good review. Take the leads at https://www.appropedia.org/Recyclebot#Other_types_of_RecycleBots and evaluate the candidates for the 5 practical points of [[Distributive Enterprise Assessment]]. These leads are shown below:
+=Iframe=
+<html><iframe src="https://www.appropedia.org/Recyclebot#Other_types_of_RecycleBots" width=1000 height=400>
+</iframe></html>
+=Internal Links=
+*[[Open Source Filament Maker]]
+*[[Lyman Filament Maker]]
+=External Links=
+*
+[[Category: 3D Printing]] [[Category: FDM Filament]]