3D Printing Filament: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 4: Line 4:
*Standard TPU for OSE - [https://www.amazon.com/gp/product/B078YNWLS5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1] or search accordingly. Definitely 2.85 mm, not 1.75 mm.
*Standard TPU for OSE - [https://www.amazon.com/gp/product/B078YNWLS5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1] or search accordingly. Definitely 2.85 mm, not 1.75 mm.


= Links and Sources =
= Links =
*http://reprap.org/wiki/Feeding_filament
*http://reprap.org/wiki/Feeding_filament
=See Also=
*[[Composite FDM Filaments]]
*[[Composite FDM Filaments]]
*[[Lyman Filament Extruder]]
*[[Lyman Filament Extruder]]
*[[Filament Extruder]]
*[[Filament Extruder]]

Revision as of 18:49, 22 September 2020

OSE Choice

  • Standard for OSE - [1]. 2.85 mm preferred. 1.75 will work but not as well, depending on use case.
  • Standard TPU for OSE - [2] or search accordingly. Definitely 2.85 mm, not 1.75 mm.

Links

Retrieved from "https://wiki.opensourceecology.org/index.php?title=3D_Printing_Filament&oldid=233955"