April 2011 Production Run Hydraulics BOM: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 6: Line 6:
#'''[2] Front Loader cylinders - 36" - $174 - 48 5/8" retracted length - [https://www.surpluscenter.com/item.asp?item=9-6775&catname=hydraulic] & [2] of [[https://www.surpluscenter.com/item.asp?item=9-7941-36&catname=hydraulic]]'''
#'''[2] Front Loader cylinders - 36" - $174 - 48 5/8" retracted length - [https://www.surpluscenter.com/item.asp?item=9-6775&catname=hydraulic] & [2] of [[https://www.surpluscenter.com/item.asp?item=9-7941-36&catname=hydraulic]]'''
#'''[8] 3/8 NPTM x 1/2 NPTF 90 SWIVEL [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-1501-6-8] for Loader and QA Plate cylinders [https://www.surpluscenter.com/item.asp?item=9-7619-30&catname=hydraulic]'''
#'''[8] 3/8 NPTM x 1/2 NPTF 90 SWIVEL [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-1501-6-8] for Loader and QA Plate cylinders [https://www.surpluscenter.com/item.asp?item=9-7619-30&catname=hydraulic]'''
#[4] Motors - [https://www.surpluscenter.com/item.asp?item=9-7469&catname=]
#'''[4] Motors - [https://www.surpluscenter.com/item.asp?item=9-7469&catname=]'''
##[8] SAE M 10 to NPT M 1/2" for Ports [https://www.surpluscenter.com/item.asp?item=9-6401-10-8&catname=hydraulic]
##'''[8] SAE M 10 to NPT M 1/2" for Ports [https://www.surpluscenter.com/item.asp?item=9-6401-10-8&catname=hydraulic]'''
##[4] SAE 4M TO 1/4" NPTM CONNECTOR for Case Drains [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-6401-4-4]
##'''[4] SAE 4M TO 1/4" NPTM CONNECTOR for Case Drains [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-6401-4-4]'''
##[8] 1/2" QC for Motors [https://www.surpluscenter.com/item.asp?item=928&catname=hydraulic]
##'''[8] 1/2" QC for Motors [https://www.surpluscenter.com/item.asp?item=928&catname=hydraulic]'''
##[4] 1/4" QC for motors [https://www.surpluscenter.com/item.asp?item=9-6314&catname=hydraulic]
##'''[4] 1/4" QC for motors [https://www.surpluscenter.com/item.asp?item=9-6314&catname=hydraulic]'''
#[2] 1-1/4 SHAFT COUPLER W 5/16" KEYWAY - [https://www.surpluscenter.com/item.asp?item=1-1563-J&catname=]
#'''[2] 1-1/4 SHAFT COUPLER W 5/16" KEYWAY - [https://www.surpluscenter.com/item.asp?item=1-1563-J&catname=]'''
#[1 1/3] 1-3/8" 6T fully splined shafting - [https://www.surpluscenter.com/item.asp?item=1-2938-6&catname=]
#'''[1 1/3] 1-3/8" 6T fully splined shafting - [https://www.surpluscenter.com/item.asp?item=1-2938-6&catname=]'''
#[2] Female 1-3/8" 6T spline coupling - [https://www.surpluscenter.com/item.asp?item=1-1562&catname=], $30 each
#'''[2] Female 1-3/8" 6T spline coupling - [https://www.surpluscenter.com/item.asp?item=1-1562&catname=], $30 each'''
#[12] 1.875" double split shaft collars - [https://www.surpluscenter.com/item.asp?item=1-2768-187&catname=powerTrans]
#'''[12] 1.875" double split shaft collars - [https://www.surpluscenter.com/item.asp?item=1-2768-187&catname=powerTrans]'''
#Double split - $11 - [http://www.dealsinapinch.com/ProductDetails.asp?ProductCode=A-DSA178]
#Double split - $11 - [http://www.dealsinapinch.com/ProductDetails.asp?ProductCode=A-DSA178]
#Double split - $9 -[https://www.houstonbearing.com/storefrontCommerce/cartAddItems.do Houston Bearing]
#Double split - $9 -[https://www.houstonbearing.com/storefrontCommerce/cartAddItems.do Houston Bearing]
#Double split - $9 free ship - [http://www.fremontindustrialsupply.com/servlet/the-12491/%28Qty-of-10%29-1-dsh-7-fdsh-8%22/Detail]
#Double split - $9 free ship - [http://www.fremontindustrialsupply.com/servlet/the-12491/%28Qty-of-10%29-1-dsh-7-fdsh-8%22/Detail]
#got 2 single split - [https://www.surpluscenter.com/item.asp?item=1-2767-187&catname=powerTrans]
#Single split - [https://www.surpluscenter.com/item.asp?item=1-2767-187&catname=powerTrans]
#[1] 1/2" male QC tip, which already have female part [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=928-aa]
 


==Motor Valves==
==Motor Valves==
Line 48: Line 48:
*'''[6] 1/2" swivels [https://www.surpluscenter.com/item.asp?catname=&qty=1&item=9-1404-8-8] - 4 valve outlet + 2 cushion valve'''
*'''[6] 1/2" swivels [https://www.surpluscenter.com/item.asp?catname=&qty=1&item=9-1404-8-8] - 4 valve outlet + 2 cushion valve'''
*'''[2] 1/2" nip - [https://www.surpluscenter.com/item.asp?item=9-5404-8-8&catname=hydraulic] - going from between swivel and tee'''
*'''[2] 1/2" nip - [https://www.surpluscenter.com/item.asp?item=9-5404-8-8&catname=hydraulic] - going from between swivel and tee'''
*'''[2] NPTF Tee [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]- need 2 more elsewhere for QA plates'''
*'''[4] NPTF Tee [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]- (includes QA plates'''


==Power Cube==
==Power Cube==

Revision as of 06:51, 1 May 2011

Tractor

See Parts Sourcing for contact information. Note: this includes hydraulics and balance of system after metal.

  1. [8] 1-7/8" Flange Bearings - [1] ; plus BearingsOn plus Big Bearing Store
  2. [2] Front Loader cylinders - 36" - $174 - 48 5/8" retracted length - [2] & [2] of [[3]]
  3. [8] 3/8 NPTM x 1/2 NPTF 90 SWIVEL [4] for Loader and QA Plate cylinders [5]
  4. [4] Motors - [6]
    1. [8] SAE M 10 to NPT M 1/2" for Ports [7]
    2. [4] SAE 4M TO 1/4" NPTM CONNECTOR for Case Drains [8]
    3. [8] 1/2" QC for Motors [9]
    4. [4] 1/4" QC for motors [10]
  5. [2] 1-1/4 SHAFT COUPLER W 5/16" KEYWAY - [11]
  6. [1 1/3] 1-3/8" 6T fully splined shafting - [12]
  7. [2] Female 1-3/8" 6T spline coupling - [13], $30 each
  8. [12] 1.875" double split shaft collars - [14]
  9. Double split - $11 - [15]
  10. Double split - $9 -Houston Bearing
  11. Double split - $9 free ship - [16]
  12. Single split - [17]


Motor Valves

  • [1] 3-spool motor valve, 25 gpm - [18], $288
  • [4] 1/2" Quick Couplers [19] - for motor valve work ports
  • [2] 3/4" Quick Couplers for one set of motor valve work ports - Dalton Hydraulics
  • [4] 1/2" Swivels for work ports [20] - for 2 sets of work ports to wheel motors
  • [1] 3/4" tee for inlet - [21]
  • [1] 3/4" elbow for inlet - [22]
  • [2] 30 GPM check valves for inlet - [23]
  • [2] 3/4" QC for inlet - Dalton
  • [5] 3/4"nips for inlet including valve in/out - [24]
  • [2] 1/2 NPT hex nipples [25]-for auxiliary pair of motor valve work ports
  • [2] 3/4 NPT to 1/2 NPT bushing [26] - auxiliary work ports - NA

Loader Valve

  • [1] Prince 2 Spool Valve - [27] $189
  • [1] 3/4" NPT nip for outlet - [28]
  • [4] 1/2" Swivels for work ports [29] - for 2 sets of work ports to wheel motors
  • [1] 3/4" QC for outlet
  • [2] 1/2" tees to split to 2 cylinders

Cushion Valves

  • [1] 1/2 NPT 30 GPM 1500-3000 PSI HYD CUSHION VALVES - [30]
  • [6] 1/2" swivels [31] - 4 valve outlet + 2 cushion valve
  • [2] 1/2" nip - [32] - going from between swivel and tee
  • [4] NPTF Tee [33]- (includes QA plates

Power Cube

  • Pump -
  • [1] Coupler half, 5/8" - $10
  • [1] Coupler half, 1" - $10
  • [1] Solid spider - $14
    • [1] 3/4 NPT coupling - found at big box hardware stores
  • [1] Suction strainer, 2" to 1-1/4" - [34] - $23
    • Use for dual Power Cubes
    • [1] Use 2" coupler from bix box store to thread into Power Cube frame
  • [1] Pressure relief for power cube bypass- [35]
  • [1] 20 GPM return Line Filter - [36]
  • [1] 3/4" NPT Swivel for return line filter going into frame - [37]
  • [2] 3/4" NPT hex nip on both sides of filter - [38]
  • [1] 1"-3/4" NPT reducer bushing for frame receptacle for return filter - [39]
  • [1] 3/4" quick coupler for return line to filter
  • [2] 1/2" quick couplers for main power lines

Soil Pulverizer

  • Hydraulic PTO Motor -
  • 10' hose -

Hoses

Power Cube

  • [1] 2 foot hose from pump outlet to return line filter - [40]
  • [2] 10 foot hoses, already have these - [41]

Pressure Bypass

  • [1] 1/2" NPT Bypass valve - [42]
  • [3] 1/2" Quick couplers - 1 complete for tee near pump, one going from return filter to tee, and male tip for return line. This gives one extra female quick coupler left over. This set of 3 QCs does not cover hoses going from and to the PowerCube.
  • [4] 1/2" NPTF hex nip for one and other side of tee, on both tees - [43]
  • [2] 1/2" NPTF tee - from outlet of pump to pressure bypass, and from bypass valve into return line filter - [44]


Between Motor Valves & Motors

  • [4] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for in/out of the valves [45]
  • [4] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for in/out of front motors [46]
  • [4] 1/2 X 1/2 X 1/2 NPTF TEE [47]
  • [4] 1/2" X 48" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for rear motors [48]

Motor Case Drains

  • [2] 1/4" X 72" NPTM 2750 PSI HYD HOSE to run parallel with tractor sides [49]
  • [1] 1/4" X 30" NPTM 2750 PSI HYD HOSE from Tee to Tee in return hose [50]
  • [1] 1/4" X 36" NPTM 2750 PSI HYD HOSE to Rear Motors [51]
  • [3] 1/4 X 1/4 X 1/4 NPTF TEE [52]
  • [3] 1/4 NPT hex nipples [53]
  • [4] 1/4" NPT quick couplers are already with the motors

Front Loader

  • [2] 1/2" X 12" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE from Valves to Cushion [54]
  • [2] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for left front loader cylinder [55]
  • [1] 1/2" X 48" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for right front loader cylinder [56]
  • [1] 1/2" X 60" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for right front loader cylinder [57]

Front loader QA Cylinder Hoses

  • [4] 3/8" NPTM x 1/2" NPTF swivel - [58] - swivels for QA cylinders
  • [2] 1/2" nips - going from cylinder swivels to tees - [59]
  • [2] 1/2" NPTF tees - from cylinder to hoses - [60]
  • [2] male QC tips - for plugging into control valves - [61]
  • [2] 1/2" X 48" NPTM 3000 PSI HYD HOSE [62]
  • [1] 1/2" X 120" NPTM 3000 PSI HYD HOSE [63]
  • [1] 1/2" X 144" NPTM 3000 PSI HYD HOSE [64]
Retrieved from "https://wiki.opensourceecology.org/index.php?title=April_2011_Production_Run_Hydraulics_BOM&oldid=23454"